نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Rectangular metal power supply unit, matte grey finish, screw terminals visible

myVolts

myVolts S-50-24 24V 2.1A 50.4W AT power supply

SKU CH-P40R-6VM0Z MPN S-50-24

Delivers 24 V at 2.1 A with 50.4 W output, selectable 85–132 VAC or 170–264 VAC input, 86 % efficiency, and copper-coil reliability

  • TypeAT
  • Delivers 50.4 W to run 24 V equipment reliably
  • 86 % efficiency cuts heat and running cost
  • Wide 85-264 VAC input suits global mains supplies
  • ±1 % output regulation keeps voltage steady under load
  • Selectable input switch covers 115 V and 230 V regions

AT switching power supply

The myVolts S-50-24 is a 24 V, 2.1 A AT switching power supply rated at 50.4 W. It accepts a selectable AC input of 85–132 VAC or 170–264 VAC at 47–63 Hz and delivers a regulated DC output with ±1 % voltage tolerance. A copper coil transformer and magnetic ring capacitor support stable operation in industrial environments.

Suitable for fixed 24 V loads.

This unit suits builders powering PLC control systems, industrial automation or transportation equipment that require a steady 24 V rail up to 2.1 A. The ±10 % adjustable range covers minor trimming only. Buyers who need a wider output voltage range, higher current or multiple output rails should look at a different supply.

86 % efficiency at 50.4 W

At full load the supply operates at 86 % efficiency, drawing 1.1 A at 115 VAC or 0.65 A at 230 VAC. Ripple and noise are specified at 200 mVp-p with line and load regulation each held to ±0.5 %. Cold-start inrush reaches 45 A at 230 V, and leakage current stays below 2 mA at 240 VAC.

أبرز المميزات

  • Delivers 50.4 W to run 24 V equipment reliably
  • 86 % efficiency cuts heat and running cost
  • Wide 85-264 VAC input suits global mains supplies
  • ±1 % output regulation keeps voltage steady under load
  • Selectable input switch covers 115 V and 230 V regions

المواصفات

TypeAT

أسئلة حول هذا المنتج

How can I confirm the S-50-24 is delivering a steady 24 V after wiring it up?

Measure the DC output with a multimeter; it should read within ±1 % of 24 V and show no more than 200 mV peak-to-peak ripple.

What comes in the box with the S-50-24 and what must I source separately?

The unit itself is supplied; you will need to provide an AC mains cable suited to your local plug and any DC wiring or connectors for the load.

Which input-voltage setting should I select on the S-50-24 for a 230 V mains supply?

Slide the selector switch to the 170-264 VAC position; the supply will then draw about 0.65 A at 230 VAC.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.