Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk
Compact green PCB module with 24-pin ATX connector and DC input cables

myVolts

myVolts Santing 300W 12V DC AT Power Supply Module

SKU CH-KCJV-YKQK2

AT-type 300 W module converts 12 V DC input to full ATX rails for mini-ITX and 1U builds

  • TypeAT
  • Industrial solid capacitors deliver stable, reliable operation at high temperatures
  • 24-pin ATX cable plugs straight in for immediate use
  • 300 W output from a 12 V DC source with required adapter
  • Over-current and short-circuit protection keeps connected hardware safe
  • Compact 154 x 35 x 15 mm board fits mini-ITX and 1U cases

AT Power Module for Mini-ITX Builds

The myVolts Santing 300W 12V DC AT Power Supply Module converts a 12V DC source into standard ATX voltages for compact systems. It delivers 300W output with 85% efficiency and includes industrial solid capacitors rated for 0 to 55°C operation. A 24-pin ATX cable and DC input lead are supplied for direct installation.

Suits Embedded and Space-Constrained Systems

Builders assembling Mini-ITX, 1U, HTPC, POS, digital signage or thin-client platforms will find the 154 x 35 x 15mm board fits tight enclosures. Over-current and short-circuit protection safeguard connected hardware. Not suitable for builds that require standard AC input or ATX-form-factor power supplies.

Requires 12V DC Source Up to 25A

The module accepts 11.4-12.6V DC input and draws a maximum of 25A, so the external adapter or battery must sustain that current continuously. Without a capable 12V DC source the unit cannot deliver its rated 300W output.

Ciri-ciri utama

  • Industrial solid capacitors deliver stable, reliable operation at high temperatures
  • 24-pin ATX cable plugs straight in for immediate use
  • 300 W output from a 12 V DC source with required adapter
  • Over-current and short-circuit protection keeps connected hardware safe
  • Compact 154 x 35 x 15 mm board fits mini-ITX and 1U cases

Spesifikasi

TypeAT

Soalan tentang produk ini

Should I pick a higher-wattage version for a mining rig or a lower one for a simple HTPC?

This module is a single 300 W design; there are no alternative capacities listed, so you match the 300 W rating to your build's total draw.

What does the 300 W output actually deliver when the board is running inside a 1U case at full load?

It converts a 12 V DC source (11.4–12.6 V, up to 25 A) into ATX rails at 85 % efficiency, giving up to 300 W continuous while the case stays within 0–55 °C.

The board takes a 12 V DC input — what connector standard does that use and what current limit does it enforce?

A dedicated DC input cable plugs into the module; the input is rated for a maximum of 25 A at 12 V, capping the available power at the source.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.