Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk
Four green 288-pin DDR4 UDIMM modules without heat spreaders

NEMIX RAM

NEMIX RAM 128GB (4x32GB) DDR4 2933 CL21 2Rx8 1.2V UDIMM memory upgrade

SKU CH-G0DQ-5XPHB

A 128 GB DDR4 2933 CL21 kit of four 32 GB 2Rx8 unbuffered UDIMMs at 1.2 V for Supermicro systems

  • Capacity128GB (4 x 32GB)
  • SpeedDDR4 2933 (PC4 23400)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 128 GB total capacity from four 32 GB modules
  • 2933 MHz DDR4 speed rated at PC4-23400
  • CL21 latency at 1.2 V standard voltage
  • 2Rx8 dual-rank organisation for density
  • 288-pin UDIMM form factor fits Supermicro boards

128GB DDR4 2933 kit for Supermicro systems

This 128GB kit contains four 32GB DDR4 UDIMM modules rated at 2933MT/s with CL21 latency. It is built for Supermicro desktop and workstation motherboards that accept non-ECC unbuffered memory. The 2Rx8 organisation and 1.2V operation match the platform requirements.

Replaces lower-capacity or slower DDR4 UDIMMs

If your Supermicro board currently runs smaller modules or a lower speed grade, this kit raises total capacity to 128GB and sets the data rate to 2933MT/s. The upgrade is worthwhile when workloads need more simultaneous threads or larger datasets than the existing memory can hold.

Verify four free 288-pin slots

Confirm the motherboard has four available DDR4 UDIMM slots and does not require registered or ECC modules. The kit uses 288-pin unbuffered DIMMs without heat spreaders, so clearance around the CPU socket should also be checked.

Ciri-ciri utama

  • 128 GB total capacity from four 32 GB modules
  • 2933 MHz DDR4 speed rated at PC4-23400
  • CL21 latency at 1.2 V standard voltage
  • 2Rx8 dual-rank organisation for density
  • 288-pin UDIMM form factor fits Supermicro boards

Spesifikasi

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR4 2933MHZ Non-ECC Unbuffered UDIMM
Part NumberMD23400-328K4
Capacity128GB (4 x 32GB)
SpeedDDR4 2933 (PC4 23400)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemSupermicro
CAS LatencyCL21
Heat SpreaderNo
Type288-Pin DDR4 UDIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content128GB (4X32GB) DDR4 2933MHZ PC4-23400 2Rx8 1.2V CL21 288-PIN Non-ECC Unbuffered UDIMM KIT

Soalan tentang produk ini

Will these 288-pin DDR4 UDIMM modules fit the MBD-C9Z490-PG motherboard?

Yes, the kit is built for Supermicro boards including the MBD-C9Z490-PG and uses the standard 288-pin DDR4 UDIMM form factor.

What is the correct way to populate all four 32 GB sticks for quad-channel operation?

Install one module in each of the four memory channels following the motherboard manual slot order; the common mistake is placing two modules in the same channel.

Do these non-ECC unbuffered DIMMs need any firmware updates or periodic re-seating over time?

No firmware is required and the modules are designed to run at 1.2 V without further intervention once seated correctly.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.