NEMIX RAM
NEMIX RAM 128GB (4x32GB) DDR4 2933 CL21 2Rx8 1.2V UDIMM memory upgrade
A 128 GB DDR4 2933 CL21 kit of four 32 GB 2Rx8 unbuffered UDIMMs at 1.2 V for Supermicro systems
- Capacity128GB (4 x 32GB)
- SpeedDDR4 2933 (PC4 23400)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 128 GB total capacity from four 32 GB modules
- 2933 MHz DDR4 speed rated at PC4-23400
- CL21 latency at 1.2 V standard voltage
- 2Rx8 dual-rank organisation for density
- 288-pin UDIMM form factor fits Supermicro boards
128GB DDR4 2933 kit for Supermicro systems
This 128GB kit contains four 32GB DDR4 UDIMM modules rated at 2933MT/s with CL21 latency. It is built for Supermicro desktop and workstation motherboards that accept non-ECC unbuffered memory. The 2Rx8 organisation and 1.2V operation match the platform requirements.
Replaces lower-capacity or slower DDR4 UDIMMs
If your Supermicro board currently runs smaller modules or a lower speed grade, this kit raises total capacity to 128GB and sets the data rate to 2933MT/s. The upgrade is worthwhile when workloads need more simultaneous threads or larger datasets than the existing memory can hold.
Verify four free 288-pin slots
Confirm the motherboard has four available DDR4 UDIMM slots and does not require registered or ECC modules. The kit uses 288-pin unbuffered DIMMs without heat spreaders, so clearance around the CPU socket should also be checked.
I korthet
- 128 GB total capacity from four 32 GB modules
- 2933 MHz DDR4 speed rated at PC4-23400
- CL21 latency at 1.2 V standard voltage
- 2Rx8 dual-rank organisation for density
- 288-pin UDIMM form factor fits Supermicro boards
Specifikationer
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | SuperMicro DDR4 2933MHZ Non-ECC Unbuffered UDIMM |
| Part Number | MD23400-328K4 |
| Capacity | 128GB (4 x 32GB) |
| Speed | DDR4 2933 (PC4 23400) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Supermicro |
| CAS Latency | CL21 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 UDIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 128GB (4X32GB) DDR4 2933MHZ PC4-23400 2Rx8 1.2V CL21 288-PIN Non-ECC Unbuffered UDIMM KIT |
Frågor om den här produkten
Will these 288-pin DDR4 UDIMM modules fit the MBD-C9Z490-PG motherboard?
Yes, the kit is built for Supermicro boards including the MBD-C9Z490-PG and uses the standard 288-pin DDR4 UDIMM form factor.
What is the correct way to populate all four 32 GB sticks for quad-channel operation?
Install one module in each of the four memory channels following the motherboard manual slot order; the common mistake is placing two modules in the same channel.
Do these non-ECC unbuffered DIMMs need any firmware updates or periodic re-seating over time?
No firmware is required and the modules are designed to run at 1.2 V without further intervention once seated correctly.
Även i den här avdelningen
Andra har jämfört dessa
Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.
Mushkin Enhanced
Mushkin Enhanced 4GB DDR2-800 CL6 SoDIMM Apple 971741A memory upgrade
104,99 US$
0.00133157BTC
I lager
SK hynix
SK hynix HYMD232M646C6-J 256MB DDR 333MHz PC2700 CL2.5 SODIMM laptop RAM
- 4GB (2 x 2GB)
7,99 US$
0.00010134BTC
I lager