NEMIX RAM
NEMIX RAM 128GB DDR5 6400 PC5-51200 2Rx4 CL52 1.1V ECC Registered RDIMM memory upgrade
128GB DDR5 6400 registered ECC RDIMM with CL52 latency and 1.1V operation for Supermicro H13SSW motherboards
- Capacity128GB
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 128 GB capacity lets you fully populate Supermicro H13SSW slots
- DDR5 6400 speed with CL52 timing matches the board's rated frequency
- Registered ECC design offloads the controller and corrects single-bit errors on the fly
- 1 V operation meets the server's specified voltage requirement
- 288-pin RDIMM form factor fits the exact DIMM slots your motherboard expects
128GB DDR5-6400 ECC RDIMM for Supermicro H13SSW
This 128GB DDR5-6400 registered ECC module is built for the Supermicro H13SSW motherboard. It delivers the exact rank, voltage and timing the board's memory controller expects so the full capacity is recognised at rated speed. The 2Rx4 organisation and 1.1V operation match the platform's qualified specifications.
288-pin registered form factor with major OEM DRAM
The 288-pin RDIMM form factor fits only registered DIMM slots; it will not work in UDIMM or SODIMM sockets. Registered buffering offloads the memory controller, allowing every populated slot to run at full capacity. ECC corrects single-bit errors on the fly to prevent silent data corruption. Chips are sourced from Samsung, Micron or Hynix.
Replaces lower-capacity or slower DDR5 RDIMMs
Upgrading from smaller or lower-speed registered ECC modules adds capacity and bandwidth for memory-bound server workloads. The jump is worth it when your application hits capacity limits or needs the 6400 MT/s data rate. Verify your system manual for supported populations and maximum capacity per slot before purchasing.
Ciri-ciri utama
- 128 GB capacity lets you fully populate Supermicro H13SSW slots
- DDR5 6400 speed with CL52 timing matches the board's rated frequency
- Registered ECC design offloads the controller and corrects single-bit errors on the fly
- 1 V operation meets the server's specified voltage requirement
- 288-pin RDIMM form factor fits the exact DIMM slots your motherboard expects
Spesifikasi
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-724K1 |
| Capacity | 128GB |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 128GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Soalan tentang produk ini
Does the DDR5 6400 PC5-51200 interface cap at CL52 on this module?
Yes, the module is rated CL52 at DDR5 6400 (PC5-51200) and the registered ECC design keeps every slot stable at that timing when fully populated.
What physical slot and form factor does the 288-pin RDIMM require?
It fits a standard 288-pin DDR5 RDIMM slot on the Supermicro H13SSW motherboard; UDIMM or SODIMM slots will not accept it.
How is the 2Rx4 registered kit installed and what step is often missed?
Insert the RDIMM into the correct population-order slot per the H13SSW manual, press until the ejectors lock, then verify the BIOS recognises the full 128 GB at 6400 MT/s.
Juga di rak ini
Pelanggan turut membandingkan
Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.



