我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Green circuit board with black memory chips, gold edge connector, no heat spreader

NEMIX RAM

NEMIX RAM 128GB DDR5 6400 PC5-51200 2Rx4 CL52 1.1V ECC Registered RDIMM memory upgrade

SKU CH-DB4C-DPXDW

128GB DDR5 6400 registered ECC RDIMM with CL52 latency and 1.1V operation for Supermicro H13SSW motherboards

  • Capacity128GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes
  • 128 GB capacity lets you fully populate Supermicro H13SSW slots
  • DDR5 6400 speed with CL52 timing matches the board's rated frequency
  • Registered ECC design offloads the controller and corrects single-bit errors on the fly
  • 1 V operation meets the server's specified voltage requirement
  • 288-pin RDIMM form factor fits the exact DIMM slots your motherboard expects

128GB DDR5-6400 ECC RDIMM for Supermicro H13SSW

This 128GB DDR5-6400 registered ECC module is built for the Supermicro H13SSW motherboard. It delivers the exact rank, voltage and timing the board's memory controller expects so the full capacity is recognised at rated speed. The 2Rx4 organisation and 1.1V operation match the platform's qualified specifications.

288-pin registered form factor with major OEM DRAM

The 288-pin RDIMM form factor fits only registered DIMM slots; it will not work in UDIMM or SODIMM sockets. Registered buffering offloads the memory controller, allowing every populated slot to run at full capacity. ECC corrects single-bit errors on the fly to prevent silent data corruption. Chips are sourced from Samsung, Micron or Hynix.

Replaces lower-capacity or slower DDR5 RDIMMs

Upgrading from smaller or lower-speed registered ECC modules adds capacity and bandwidth for memory-bound server workloads. The jump is worth it when your application hits capacity limits or needs the 6400 MT/s data rate. Verify your system manual for supported populations and maximum capacity per slot before purchasing.

商品特色

  • 128 GB capacity lets you fully populate Supermicro H13SSW slots
  • DDR5 6400 speed with CL52 timing matches the board's rated frequency
  • Registered ECC design offloads the controller and corrects single-bit errors on the fly
  • 1 V operation meets the server's specified voltage requirement
  • 288-pin RDIMM form factor fits the exact DIMM slots your motherboard expects

商品規格

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-724K1
Capacity128GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

商品問答

Does the DDR5 6400 PC5-51200 interface cap at CL52 on this module?

Yes, the module is rated CL52 at DDR5 6400 (PC5-51200) and the registered ECC design keeps every slot stable at that timing when fully populated.

What physical slot and form factor does the 288-pin RDIMM require?

It fits a standard 288-pin DDR5 RDIMM slot on the Supermicro H13SSW motherboard; UDIMM or SODIMM slots will not accept it.

How is the 2Rx4 registered kit installed and what step is often missed?

Insert the RDIMM into the correct population-order slot per the H13SSW manual, press until the ejectors lock, then verify the BIOS recognises the full 128 GB at 6400 MT/s.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。