Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk
Two green DDR3 SODIMM modules with black chips and gold contacts

NEMIX RAM

NEMIX RAM 16GB (2x8GB) DDR3 1333MHz PC3-10600 2Rx8 1.35V 204-PIN SODIMM POSIFLEX XT-5515 memory upgrade

SKU CH-WAZV-CRV3B

A 16 GB DDR3 SODIMM kit built for the Posiflex XT-5515 point-of-sale terminal

  • Capacity16GB (2 x 8GB)
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • Designed for POSIFLEX XT-5515 terminals
  • 16GB kit (2 x 8GB) expands capacity
  • DDR3 1333MHz PC3-10600 speed rating
  • Low-voltage 1.35V reduces power draw
  • 204-pin SODIMM fits compatible POS systems

System-specific DDR3 kit

This 16 GB kit contains two 8 GB SODIMM modules built for POSIFLEX XT-5515 and JIVA foldable terminals. It targets IT teams maintaining point-of-sale fleets that require validated DDR3 memory. The unbuffered non-ECC design matches the original platform specification.

Fits 204-pin DDR3 slots

Each module installs directly into the terminal’s SO-DIMM sockets without adapters or configuration changes. The CL9 latency and 1.50 V operation align with the host chipset, freeing the system from compatibility guesswork. No heat spreader keeps the low-profile form factor intact.

Tested under sustained load

Modules undergo extended stress testing before shipping to verify stability during continuous transaction workloads. The 2Rx8 organisation and major-brand DRAM maintain consistent throughput over long shifts. The 1.35 V low-voltage rating reduces thermal pressure in fanless enclosures.

Ciri-ciri utama

  • Designed for POSIFLEX XT-5515 terminals
  • 16GB kit (2 x 8GB) expands capacity
  • DDR3 1333MHz PC3-10600 speed rating
  • Low-voltage 1.35V reduces power draw
  • 204-pin SODIMM fits compatible POS systems

Spesifikasi

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-828K2
Capacity16GB (2 x 8GB)
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (2X8GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM KIT

Soalan tentang produk ini

Does the 1.35 V rating on the POSIFLEX XT-5515 kit limit stability during long shifts?

The modules are specified at 1.50 V, so the 1.35 V figure is a lower operating point rather than a hard limit; sustained workloads run at the rated voltage.

How much heat or fan noise do two 8 GB DDR3 SODIMMs add to a POSIFLEX terminal running all day?

Unbuffered DDR3 SODIMMs without heat spreaders draw modest power and produce negligible extra heat or noise inside the XT-5515 chassis.

The kit is labelled 2Rx8 — does the terminal need a specific chipset or BIOS revision to recognise dual-rank modules?

The memory is validated for the POSIFLEX XT-5515 and JIVA Foldable 15" terminal; no additional chipset or BIOS version is required beyond the standard platform support.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.