NEMIX RAM
NEMIX RAM 16GB (2x8GB) DDR4 3200 CL22 288-Pin UDIMM THINKMATE Compatible memory upgrade
16 GB dual-channel DDR4-3200 CL22 kit built for ThinkMate XF6-14X1 workstations
- Capacity16GB (2 x 8GB)
- SpeedDDR4 3200 (PC4 25600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 16 GB dual-channel kit boosts multitasking headroom
- DDR4 3200 speed matches ThinkMate XF6-14X1 spec
- CL22 latency at 1.2 V keeps power draw low
- Unbuffered non-ECC 288-pin UDIMM drops straight in
- Major OEM Samsung, Micron or Hynix chips ensure stability
ThinkMate XF6-14X1 Workstation Memory Kit
This 16GB kit contains two 8GB DDR4 UDIMM modules validated for the ThinkMate XF6-14X1 workstation. It runs at 3200MHz with a CAS latency of CL22 and operates at the standard 1.2V. The unbuffered, non-ECC design matches the platform's memory architecture for a direct upgrade.
Ideal for ThinkMate XF6-14X1 owners needing more
Builders who require error-correcting code memory, registered modules, or speeds beyond 3200MHz should look elsewhere. Systems that demand a heat spreader or a different pin count will not accept these sticks. This kit is strictly for compatible ThinkMate workstation boards.
Dual-rank 1Rx8 layout provides 16GB total capacity
Two modules populate two slots, leaving additional slots open for future expansion if the board supports more than 16GB. The PC4-25600 rating handles typical workstation workloads, while the CL22 timing sets the latency floor. Maximum supported capacity depends on the specific motherboard specification.
Ciri-ciri utama
- 16 GB dual-channel kit boosts multitasking headroom
- DDR4 3200 speed matches ThinkMate XF6-14X1 spec
- CL22 latency at 1.2 V keeps power draw low
- Unbuffered non-ECC 288-pin UDIMM drops straight in
- Major OEM Samsung, Micron or Hynix chips ensure stability
Spesifikasi
| Brand | NEMIX RAM |
|---|---|
| Series | THINKMATE Server/Workstation Compatible Series Memory |
| Model | THINKMATE DDR4 3200MHZ Non-ECC Unbuffered UDIMM |
| Part Number | MD25600-818K2 |
| Capacity | 16GB (2 x 8GB) |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | THINKMATE |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 UDIMM |
| Rank | 1Rx8 |
| Features | DDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 16GB (2X8GB) DDR4 3200MHZ PC4-25600 1Rx8 1.2V CL22 288-PIN Non-ECC Unbuffered UDIMM KIT |
Soalan tentang produk ini
My workstation is a THINKMATE XF6-14X1 — will this 288-Pin UDIMM kit fit the motherboard slots?
The kit is built as a THINKMATE compatible 288-Pin DDR4 UDIMM, so it installs directly into the XF6-14X1 memory slots without an adapter.
I plan to keep my existing DDR4 3200 CL22 modules — will the new 1Rx8 rank sticks work alongside them?
Both kits share the same DDR4 3200 speed, 1.20 V voltage and CL22 latency, so the motherboard can run them together at those settings.
After seating both 8 GB modules, how can I confirm the system sees the full 16 GB at 3200 MT/s?
Open the BIOS or UEFI on the THINKMATE workstation and verify the memory summary shows 16 GB total capacity running at 3200 MT/s with CL22 timings.
Juga di rak ini
Pelanggan turut membandingkan
Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.
Mushkin Enhanced
Mushkin Enhanced 4GB DDR2-800 CL6 SoDIMM Apple 971741A memory upgrade
USD 104.99
0.00133699BTC
Ada stok
SK hynix
SK hynix HYMD232M646C6-J 256MB DDR 333MHz PC2700 CL2.5 SODIMM laptop RAM
- 4GB (2 x 2GB)
USD 7.99
0.00010175BTC
Ada stok