저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인

NEMIX RAM

NEMIX RAM 16GB (2x8GB) DDR4 3200 CL22 288-Pin UDIMM THINKMATE Compatible memory upgrade

SKU CH-T6H2-270Q6

16 GB dual-channel DDR4-3200 CL22 kit built for ThinkMate XF6-14X1 workstations

  • Capacity16GB (2 x 8GB)
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16 GB dual-channel kit boosts multitasking headroom
  • DDR4 3200 speed matches ThinkMate XF6-14X1 spec
  • CL22 latency at 1.2 V keeps power draw low
  • Unbuffered non-ECC 288-pin UDIMM drops straight in
  • Major OEM Samsung, Micron or Hynix chips ensure stability

ThinkMate XF6-14X1 Workstation Memory Kit

This 16GB kit contains two 8GB DDR4 UDIMM modules validated for the ThinkMate XF6-14X1 workstation. It runs at 3200MHz with a CAS latency of CL22 and operates at the standard 1.2V. The unbuffered, non-ECC design matches the platform's memory architecture for a direct upgrade.

Ideal for ThinkMate XF6-14X1 owners needing more

Builders who require error-correcting code memory, registered modules, or speeds beyond 3200MHz should look elsewhere. Systems that demand a heat spreader or a different pin count will not accept these sticks. This kit is strictly for compatible ThinkMate workstation boards.

Dual-rank 1Rx8 layout provides 16GB total capacity

Two modules populate two slots, leaving additional slots open for future expansion if the board supports more than 16GB. The PC4-25600 rating handles typical workstation workloads, while the CL22 timing sets the latency floor. Maximum supported capacity depends on the specific motherboard specification.

주요 특징

  • 16 GB dual-channel kit boosts multitasking headroom
  • DDR4 3200 speed matches ThinkMate XF6-14X1 spec
  • CL22 latency at 1.2 V keeps power draw low
  • Unbuffered non-ECC 288-pin UDIMM drops straight in
  • Major OEM Samsung, Micron or Hynix chips ensure stability

사양

BrandNEMIX RAM
SeriesTHINKMATE Server/Workstation Compatible Series Memory
ModelTHINKMATE DDR4 3200MHZ Non-ECC Unbuffered UDIMM
Part NumberMD25600-818K2
Capacity16GB (2 x 8GB)
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemTHINKMATE
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 UDIMM
Rank1Rx8
FeaturesDDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB (2X8GB) DDR4 3200MHZ PC4-25600 1Rx8 1.2V CL22 288-PIN Non-ECC Unbuffered UDIMM KIT

이 상품에 대한 질문

My workstation is a THINKMATE XF6-14X1 — will this 288-Pin UDIMM kit fit the motherboard slots?

The kit is built as a THINKMATE compatible 288-Pin DDR4 UDIMM, so it installs directly into the XF6-14X1 memory slots without an adapter.

I plan to keep my existing DDR4 3200 CL22 modules — will the new 1Rx8 rank sticks work alongside them?

Both kits share the same DDR4 3200 speed, 1.20 V voltage and CL22 latency, so the motherboard can run them together at those settings.

After seating both 8 GB modules, how can I confirm the system sees the full 16 GB at 3200 MT/s?

Open the BIOS or UEFI on the THINKMATE workstation and verify the memory summary shows 16 GB total capacity running at 3200 MT/s with CL22 timings.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.