Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk
Green rectangular DDR4 RDIMM module with black chips and gold contacts, no heat spreader

NEMIX RAM

NEMIX RAM 16GB DDR4 2933 PC4-23400 CL21 1Rx4 1.2V 288-Pin ECC RDIMM memory upgrade

SKU CH-G835-T16D7

Adds 16 GB of DDR4 2933 ECC registered memory with CL21 timing and 1.2 V operation for compatible Samsung servers

  • Capacity16GB
  • SpeedDDR4 2933 (PC4 23400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • ECC protection prevents data corruption in servers
  • 2933 MHz speed handles heavy workloads efficiently
  • Registered design stabilises multi-module configurations
  • 20 V operation reduces power consumption
  • Samsung-compatible module ensures system stability

16 GB DDR4 ECC RDIMM for Samsung Servers

This 16 GB DDR4 2933 MHz registered DIMM adds ECC-protected capacity to compatible Samsung servers and workstations. It runs at 1.2 V with CL21 latency and a 1Rx4 organisation across 288 pins. The module targets IT teams maintaining Samsung platforms that require registered ECC memory.

Upgrades from non-ECC or lower-capacity DDR4 RDIMMs

The jump is worthwhile when a Samsung system needs error-correcting registered memory at the PC4-23400 speed grade and the board accepts 1Rx4 modules. Builders using unbuffered DIMMs or modules with different rank configurations cannot use this part.

Tool-free slot installation.

The DIMM seats in a standard 288-pin DDR4 RDIMM socket without extra hardware. The most common issue is installing it in a motherboard that only supports unbuffered or non-ECC memory, which will prevent the system from posting.

Ciri-ciri utama

  • ECC protection prevents data corruption in servers
  • 2933 MHz speed handles heavy workloads efficiently
  • Registered design stabilises multi-module configurations
  • 20 V operation reduces power consumption
  • Samsung-compatible module ensures system stability

Spesifikasi

BrandNEMIX RAM
SeriesSamsung Server/Workstation Compatible Series Memory
ModelSamsung DDR4 2933MHZ ECC RDIMM Registered Server Memory
Part NumberMR23400-614K1
Capacity16GB
SpeedDDR4 2933 (PC4 23400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemSamsung
CAS LatencyCL21
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank1Rx4
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content16GB (1X16GB) DDR4 2933MHZ PC4-23400 1Rx4 1.2V CL21 288-PIN ECC RDIMM Registered Server Memory

Soalan tentang produk ini

Does the 288-pin DDR4 RDIMM fit a standard server DIMM slot?

Yes, the 288-pin DDR4 RDIMM form factor matches standard registered server DIMM slots that accept PC4-23400 modules.

What is the correct way to seat this registered ECC module so the server recognises all 16 GB?

Align the notch on the 288-pin edge connector with the slot key, press straight down until both retention clips click, then verify 2933 MT/s in BIOS.

Will the Samsung M393A2K40DB2-CVF compatible chipset ever need a firmware update or replacement?

The DRAM chips are major OEM Samsung, Micron or Hynix ICs tested at 1.20 V; they require no firmware updates and are rated for the system lifetime.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.