NEMIX RAM
NEMIX RAM 16GB DDR4 2933 PC4-23400 CL21 1Rx4 1.2V 288-Pin ECC RDIMM memory upgrade
Adds 16 GB of DDR4 2933 ECC registered memory with CL21 timing and 1.2 V operation for compatible Samsung servers
- Capacity16GB
- SpeedDDR4 2933 (PC4 23400)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- ECC protection prevents data corruption in servers
- 2933 MHz speed handles heavy workloads efficiently
- Registered design stabilises multi-module configurations
- 20 V operation reduces power consumption
- Samsung-compatible module ensures system stability
16 GB DDR4 ECC RDIMM for Samsung Servers
This 16 GB DDR4 2933 MHz registered DIMM adds ECC-protected capacity to compatible Samsung servers and workstations. It runs at 1.2 V with CL21 latency and a 1Rx4 organisation across 288 pins. The module targets IT teams maintaining Samsung platforms that require registered ECC memory.
Upgrades from non-ECC or lower-capacity DDR4 RDIMMs
The jump is worthwhile when a Samsung system needs error-correcting registered memory at the PC4-23400 speed grade and the board accepts 1Rx4 modules. Builders using unbuffered DIMMs or modules with different rank configurations cannot use this part.
Tool-free slot installation.
The DIMM seats in a standard 288-pin DDR4 RDIMM socket without extra hardware. The most common issue is installing it in a motherboard that only supports unbuffered or non-ECC memory, which will prevent the system from posting.
Puntos fuertes
- ECC protection prevents data corruption in servers
- 2933 MHz speed handles heavy workloads efficiently
- Registered design stabilises multi-module configurations
- 20 V operation reduces power consumption
- Samsung-compatible module ensures system stability
Especificaciones
| Brand | NEMIX RAM |
|---|---|
| Series | Samsung Server/Workstation Compatible Series Memory |
| Model | Samsung DDR4 2933MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR23400-614K1 |
| Capacity | 16GB |
| Speed | DDR4 2933 (PC4 23400) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Samsung |
| CAS Latency | CL21 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 RDIMM |
| Rank | 1Rx4 |
| Features | DDR4 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 16GB (1X16GB) DDR4 2933MHZ PC4-23400 1Rx4 1.2V CL21 288-PIN ECC RDIMM Registered Server Memory |
Preguntas sobre este artículo
Does the 288-pin DDR4 RDIMM fit a standard server DIMM slot?
Yes, the 288-pin DDR4 RDIMM form factor matches standard registered server DIMM slots that accept PC4-23400 modules.
What is the correct way to seat this registered ECC module so the server recognises all 16 GB?
Align the notch on the 288-pin edge connector with the slot key, press straight down until both retention clips click, then verify 2933 MT/s in BIOS.
Will the Samsung M393A2K40DB2-CVF compatible chipset ever need a firmware update or replacement?
The DRAM chips are major OEM Samsung, Micron or Hynix ICs tested at 1.20 V; they require no firmware updates and are rated for the system lifetime.
También en este pasillo
Los clientes también compararon
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
Mushkin Enhanced
Mushkin Enhanced 4GB DDR2-800 CL6 SoDIMM Apple 971741A memory upgrade
104,99 US$
0.0013367BTC
En stock
SK hynix
SK hynix HYMD232M646C6-J 256MB DDR 333MHz PC2700 CL2.5 SODIMM laptop RAM
- 4GB (2 x 2GB)
7,99 US$
0.00010173BTC
En stock