BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
USD 214.99
0.00278373BTC
Ada stok
NEMIX RAM
NEMIX RAM 32GB DDR4 2933 PC4-23400 CL21 1.2V 2Rx8 288-Pin UDIMM Samsung M378A4G43AB1-CVF memory upgrade
A 32 GB DDR4-2933 UDIMM module rated CL21 at 1.2 V for Samsung desktop systems
- Capacity32GB
- SpeedDDR4 2933 (PC4 23400)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 32GB capacity expands multitasking headroom for demanding workloads
- DDR4 2933 speed transfers data at PC4-23400 rates
- CL21 latency keeps response tight under load
- 2V operation reduces power draw and heat
- 2Rx8 dual-rank layout maximises density per slot
Capacity and Compatibility
This 32GB DDR4 module is built for desktop systems that require Samsung-compatible memory. It installs in a single 288-pin UDIMM slot and delivers 2933 MT/s speed with CL21 latency. The unbuffered, non-ECC design suits standard consumer motherboards rather than server platforms. Buyers who need ECC error correction or registered buffering should choose a different module.
Thermals and Power
Operating at 1.2V, the stick draws minimal power and runs without a heat spreader. Passive cooling relies on case airflow, so temperatures stay low during typical office workloads and light multitasking. Silent operation is assured because no fan or active component is present. Builders who prefer heatsink-equipped modules for aesthetic reasons will not find one here.
Sustained Load Behaviour
Under continuous heavy use the memory maintains its rated 2933 MT/s frequency and CL21 timings. Samsung-sourced ICs are stress-tested by the supplier to verify stability over extended periods. The dual-rank 2Rx8 organisation helps sustain bandwidth during prolonged compute tasks. Systems that demand higher frequencies or lower latencies for all-day rendering will need faster-rated kits.
Ciri-ciri utama
- 32GB capacity expands multitasking headroom for demanding workloads
- DDR4 2933 speed transfers data at PC4-23400 rates
- CL21 latency keeps response tight under load
- 2V operation reduces power draw and heat
- 2Rx8 dual-rank layout maximises density per slot
Spesifikasi
| Brand | NEMIX RAM |
|---|---|
| Series | Samsung Desktop PC Compatible Series Memory |
| Model | Samsung DDR4 288-Pin Non-ECC Unbuffered UDIMM |
| Part Number | MD23400-328K1 |
| Capacity | 32GB |
| Speed | DDR4 2933 (PC4 23400) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Samsung |
| CAS Latency | CL21 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 UDIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 32GB (1X32GB) DDR4 2933MHZ PC4-23400 2Rx8 1.2V CL21 288-PIN Non-ECC Unbuffered UDIMM |
Soalan tentang produk ini
How do I install this 288-pin DDR4 UDIMM and which step do people often get wrong?
Align the notch on the module with the key in the motherboard slot, press down firmly until both side clips snap shut, and verify the system reports 32 GB at 2933 MT/s; the step most often missed is seating the module fully so both clips engage automatically.
What maintenance or replacement will this 32 GB module need later?
No routine maintenance is required; keep the slot and contacts free of dust, and if the system ever fails to POST or shows memory errors, replace the module under its lifetime replacement coverage.
What limit appears first when this CL21 1.2 V kit runs under sustained load?
The CAS latency of 21 cycles at 2933 MT/s sets the timing floor, so sustained workloads will hit latency-bound throughput before voltage or thermal limits become a factor.
Juga di rak ini
Pelanggan turut membandingkan
Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.
BFKK
BFKK 2U Micro ATX Rackmount 2×5.25" 4×3.5" Side 80mm Fan
- Rackmount
USD 216.99
0.00280962BTC
Ada stok
