Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk
Green circuit board DDR4 RDIMM with black chips no heat spreader

NEMIX RAM

NEMIX RAM 8GB DDR4 2400 CL17 2Rx8 1.2V 288-Pin ECC RDIMM SuperMicro memory upgrade

SKU CH-D5KM-XMQNP

8GB DDR4 2400MHz ECC registered RDIMM for SuperMicro servers with CL17 latency and 1.2V operation

  • Capacity8GB
  • SpeedDDR4 2400 (PC4 19200)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 8 GB capacity expands server memory headroom
  • DDR4 2400 speed matches SuperMicro platform specs
  • ECC registered design protects data integrity
  • 2 V operation reduces power draw
  • 288-pin RDIMM form factor fits compatible slots

SuperMicro Compatible DDR4 RDIMM

This 8 GB DDR4 2400 registered DIMM is built for SuperMicro servers and workstations that require ECC memory. The module uses a 2Rx8 organisation and runs at 1.2 V with a CL17 latency. It targets IT professionals who need validated compatibility for mission-critical systems.

Registered ECC Design Without Heat Spreader

The 288-pin RDIMM format includes an on-board register that buffers address and control signals, reducing electrical load on the memory controller. ECC circuitry detects and corrects single-bit errors to protect data integrity. No heat spreader is fitted, so airflow in the chassis must be sufficient for sustained loads.

DDR4 2400 Speed and Platform Constraints

The module operates at the DDR4 2400 (PC4-19200) data rate, which limits peak bandwidth compared with faster DDR4 grades. Registered DIMMs cannot be mixed with unbuffered modules, and the motherboard must support registered ECC memory. Capacity per slot is fixed at 8 GB with this single-rank-per-module configuration.

Ciri-ciri utama

  • 8 GB capacity expands server memory headroom
  • DDR4 2400 speed matches SuperMicro platform specs
  • ECC registered design protects data integrity
  • 2 V operation reduces power draw
  • 288-pin RDIMM form factor fits compatible slots

Spesifikasi

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR4 2666MHZ ECC RDIMM Registered Server Memory
Part NumberMR19200-828K1
Capacity8GB
SpeedDDR4 2400 (PC4 19200)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemSupermicro
CAS LatencyCL17
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank2Rx8
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content8GB (1X8GB) DDR4 2400MHZ PC4-19200 2Rx8 1.2V CL17 288-PIN ECC RDIMM Registered Server Memory

Soalan tentang produk ini

What speed does the DDR4 2400 interface actually run at in this module?

The module operates at DDR4 2400 (PC4-19200) with a CAS latency of CL17, delivering a peak transfer rate of 19200 MB/s.

Will this 288-pin ECC RDIMM fit my Supermicro server motherboard?

It uses the standard 288-pin DDR4 RDIMM form factor and is built for Supermicro systems; verify your board supports registered ECC memory before installing.

How do I install this registered DIMM and what step is often missed?

Power down, open the chassis, align the notch on the 288-pin module with the slot key, press firmly until the retention clips lock, then confirm the BIOS recognises the full 8 GB capacity.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.