SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00501606BTC
재고 있음
NEMIX RAM
NEMIX RAM 8GB DDR4 2400 CL17 2Rx8 1.2V 288-Pin ECC RDIMM SuperMicro memory upgrade
8GB DDR4 2400MHz ECC registered RDIMM for SuperMicro servers with CL17 latency and 1.2V operation
- Capacity8GB
- SpeedDDR4 2400 (PC4 19200)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 8 GB capacity expands server memory headroom
- DDR4 2400 speed matches SuperMicro platform specs
- ECC registered design protects data integrity
- 2 V operation reduces power draw
- 288-pin RDIMM form factor fits compatible slots
SuperMicro Compatible DDR4 RDIMM
This 8 GB DDR4 2400 registered DIMM is built for SuperMicro servers and workstations that require ECC memory. The module uses a 2Rx8 organisation and runs at 1.2 V with a CL17 latency. It targets IT professionals who need validated compatibility for mission-critical systems.
Registered ECC Design Without Heat Spreader
The 288-pin RDIMM format includes an on-board register that buffers address and control signals, reducing electrical load on the memory controller. ECC circuitry detects and corrects single-bit errors to protect data integrity. No heat spreader is fitted, so airflow in the chassis must be sufficient for sustained loads.
DDR4 2400 Speed and Platform Constraints
The module operates at the DDR4 2400 (PC4-19200) data rate, which limits peak bandwidth compared with faster DDR4 grades. Registered DIMMs cannot be mixed with unbuffered modules, and the motherboard must support registered ECC memory. Capacity per slot is fixed at 8 GB with this single-rank-per-module configuration.
주요 특징
- 8 GB capacity expands server memory headroom
- DDR4 2400 speed matches SuperMicro platform specs
- ECC registered design protects data integrity
- 2 V operation reduces power draw
- 288-pin RDIMM form factor fits compatible slots
사양
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | SuperMicro DDR4 2666MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR19200-828K1 |
| Capacity | 8GB |
| Speed | DDR4 2400 (PC4 19200) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Supermicro |
| CAS Latency | CL17 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 RDIMM |
| Rank | 2Rx8 |
| Features | DDR4 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 8GB (1X8GB) DDR4 2400MHZ PC4-19200 2Rx8 1.2V CL17 288-PIN ECC RDIMM Registered Server Memory |
이 상품에 대한 질문
What speed does the DDR4 2400 interface actually run at in this module?
The module operates at DDR4 2400 (PC4-19200) with a CAS latency of CL17, delivering a peak transfer rate of 19200 MB/s.
Will this 288-pin ECC RDIMM fit my Supermicro server motherboard?
It uses the standard 288-pin DDR4 RDIMM form factor and is built for Supermicro systems; verify your board supports registered ECC memory before installing.
How do I install this registered DIMM and what step is often missed?
Power down, open the chassis, align the notch on the 288-pin module with the slot key, press firmly until the retention clips lock, then confirm the BIOS recognises the full 8 GB capacity.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
