NEMIX RAM
NEMIX RAM 96GB (2x48GB) DDR5-6400 CL52 ECC RDIMM Supermicro H13DSH
96GB dual-channel DDR5 kit with two 48GB registered ECC modules at 6400 MT/s, CL52, 1.1V for Supermicro H13DSH
- Capacity96GB (2 x 48GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 96 GB capacity across two 48 GB modules for dense server memory
- DDR5 6400 speed with CL52 latency matches the Supermicro H13DSH memory controller
- Registered ECC architecture corrects single-bit errors and stabilises fully populated slots
- 1 V operation and 2Rx8 organisation follow the board's exact voltage and rank requirements
- 288-pin RDIMM form factor ensures physical and electrical compatibility with the H13DSH motherboard
96GB DDR5-6400 ECC RDIMM Kit
This 96GB kit contains two 48GB DDR5-6400 CL52 registered ECC RDIMMs built for the Supermicro H13DSH motherboard. The modules operate at 1.1V and use a 2Rx8 organization with 288-pin form factor. It is designed for servers that require registered memory with error correction.
Registered ECC stability under sustained load
The registered architecture buffers address and command signals so the memory controller stays stable when all slots are populated at full capacity. ECC detects and corrects single-bit errors on the fly, preventing silent data corruption during long-running workloads. CL52 timing at 6400 MT/s delivers consistent throughput for memory-intensive server tasks.
Verify motherboard population rules before ordering
Check the Supermicro H13DSH manual for supported DIMM capacities, approved population order, and maximum modules per channel. The board requires 288-pin RDIMMs and will not accept UDIMMs or SODIMMs. Confirm your BIOS version supports the full 96GB configuration at the rated speed.
Ciri-ciri utama
- 96 GB capacity across two 48 GB modules for dense server memory
- DDR5 6400 speed with CL52 latency matches the Supermicro H13DSH memory controller
- Registered ECC architecture corrects single-bit errors and stabilises fully populated slots
- 1 V operation and 2Rx8 organisation follow the board's exact voltage and rank requirements
- 288-pin RDIMM form factor ensures physical and electrical compatibility with the H13DSH motherboard
Spesifikasi
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-4828K2 |
| Capacity | 96GB (2 x 48GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 96GB 2X48GB DDR5 6400MHz PC5-51200 2Rx8 1.1V 288-PIN ECC RDIMM KIT |
Soalan tentang produk ini
How much heat does the 1.10 V DDR5 kit add when the server runs all day?
The modules operate at 1.10 V without a heat spreader, so they add minimal thermal load in a properly cooled chassis.
What must the motherboard provide for this 96 GB kit to function?
A Supermicro H13DSH motherboard with DDR5 RDIMM slots that support 2Rx8 registered ECC modules at 6400 MT/s.
Will this DDR5 6400 CL52 kit run at rated speed alongside slower DDR5 modules already in the system?
The memory controller will clock all populated slots to the lowest common speed, so faster modules drop down to match the slowest installed DIMMs.
Juga di rak ini
Pelanggan turut membandingkan
Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.



