We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR5 RDIMM modules without heat spreaders in a 96GB kit

NEMIX RAM

NEMIX RAM 96GB (2x48GB) DDR5-6400 CL52 ECC RDIMM Supermicro H13DSH

SKU CH-0MFW-G4R06

96GB dual-channel DDR5 kit with two 48GB registered ECC modules at 6400 MT/s, CL52, 1.1V for Supermicro H13DSH

  • Capacity96GB (2 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes
  • 96 GB capacity across two 48 GB modules for dense server memory
  • DDR5 6400 speed with CL52 latency matches the Supermicro H13DSH memory controller
  • Registered ECC architecture corrects single-bit errors and stabilises fully populated slots
  • 1 V operation and 2Rx8 organisation follow the board's exact voltage and rank requirements
  • 288-pin RDIMM form factor ensures physical and electrical compatibility with the H13DSH motherboard

96GB DDR5-6400 ECC RDIMM Kit

This 96GB kit contains two 48GB DDR5-6400 CL52 registered ECC RDIMMs built for the Supermicro H13DSH motherboard. The modules operate at 1.1V and use a 2Rx8 organization with 288-pin form factor. It is designed for servers that require registered memory with error correction.

Registered ECC stability under sustained load

The registered architecture buffers address and command signals so the memory controller stays stable when all slots are populated at full capacity. ECC detects and corrects single-bit errors on the fly, preventing silent data corruption during long-running workloads. CL52 timing at 6400 MT/s delivers consistent throughput for memory-intensive server tasks.

Verify motherboard population rules before ordering

Check the Supermicro H13DSH manual for supported DIMM capacities, approved population order, and maximum modules per channel. The board requires 288-pin RDIMMs and will not accept UDIMMs or SODIMMs. Confirm your BIOS version supports the full 96GB configuration at the rated speed.

Highlights

  • 96 GB capacity across two 48 GB modules for dense server memory
  • DDR5 6400 speed with CL52 latency matches the Supermicro H13DSH memory controller
  • Registered ECC architecture corrects single-bit errors and stabilises fully populated slots
  • 1 V operation and 2Rx8 organisation follow the board's exact voltage and rank requirements
  • 288-pin RDIMM form factor ensures physical and electrical compatibility with the H13DSH motherboard

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-4828K2
Capacity96GB (2 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB 2X48GB DDR5 6400MHz PC5-51200 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Questions about this item

How much heat does the 1.10 V DDR5 kit add when the server runs all day?

The modules operate at 1.10 V without a heat spreader, so they add minimal thermal load in a properly cooled chassis.

What must the motherboard provide for this 96 GB kit to function?

A Supermicro H13DSH motherboard with DDR5 RDIMM slots that support 2Rx8 registered ECC modules at 6400 MT/s.

Will this DDR5 6400 CL52 kit run at rated speed alongside slower DDR5 modules already in the system?

The memory controller will clock all populated slots to the lowest common speed, so faster modules drop down to match the slowest installed DIMMs.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.