Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk

NEMIX RAM

NEMIX RAM MR38400-618K4 64GB (4x16GB) DDR5 4800 ECC RDIMM

SKU CH-XKYH-RA8CS

A 64 GB quad-channel DDR5 ECC RDIMM kit running at 4800 MT/s with CL40 latency and 1.1 V operation

  • Capacity64GB (4 x 16GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 64 GB total capacity for memory-intensive server workloads
  • DDR5 4800 speed delivers high bandwidth for data-heavy tasks
  • ECC registered design detects and corrects errors for reliability
  • 1 V operation reduces power draw in dense configurations
  • Validated for ASRock WRX90 WS EVO motherboard compatibility

Targeted Server Memory Kit

This NEMIX RAM kit provides 64GB of DDR5 memory in a matched set of four 16GB modules. It is built for ASRock WRX90 WS EVO motherboards that require registered ECC DIMMs. System integrators and IT professionals handling mission-critical workloads will find the specification aligned with enterprise stability requirements. The registered design and error-correcting code suit multi-socket server boards rather than consumer desktops.

Build Integration Requirements

Each module uses a 288-pin DDR5 RDIMM form factor and operates at 1.10V with a CL40 latency. The registered buffer reduces electrical load on the memory controller, freeing the platform to populate all slots without signal degradation. Installation follows standard server DIMM procedures; the kit assumes the motherboard firmware supports the stated speed and rank configuration. Buyers needing unbuffered or non-ECC memory for consumer platforms cannot use this product.

Sustained Load Behaviour

Modules are stress-tested under load before shipping to verify reliability during continuous operation. The 1Rx8 organisation and Samsung, Micron or Hynix chipsets deliver consistent throughput at the rated 4800MT/s data rate. Error-correcting code detects and corrects single-bit errors in real time, preserving data integrity during long compute runs. Systems without registered ECC support will not benefit from these protection mechanisms.

Ciri-ciri utama

  • 64 GB total capacity for memory-intensive server workloads
  • DDR5 4800 speed delivers high bandwidth for data-heavy tasks
  • ECC registered design detects and corrects errors for reliability
  • 1 V operation reduces power draw in dense configurations
  • Validated for ASRock WRX90 WS EVO motherboard compatibility

Spesifikasi

BrandNEMIX RAM
SeriesASRock Server Motherboard Compatible Series Memory
ModelASRock DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-618K4
Capacity64GB (4 x 16GB)
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemASRock
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank1Rx8
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content64GB (4X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT

Versi lain model ini

5 lagi dalam julat yang sama

Keluarga yang sama, memori, penyejuk atau kelajuan jam yang berbeza — bandingkan sebelum membuat keputusan.

Soalan tentang produk ini

Does the CL40 latency become the bottleneck during sustained server workloads?

CL40 is the rated CAS latency for this DDR5-4800 kit; under continuous load the latency figure itself does not change, so the limit you hit first will be the 4800 MT/s transfer rate rather than the timing.

How much heat and power does the 1.10 V registered kit produce when running all day?

Each 16 GB module operates at 1.10 V without a heat spreader; registered DDR5 at this voltage typically draws only a few watts per DIMM and runs cool enough for standard server airflow.

What motherboard features must already be present for this 288-pin RDIMM kit to work?

The board needs DDR5 RDIMM slots, registered ECC support, and validation for 4800 MT/s operation — the ASRock WRX90 WS EVO is the platform this kit is built for.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.