OEM Industries
OEM Industries Delta FFB0812VHE 80mm CPU cooler
An 80 mm dual ball-bearing fan with a 3-pin connector, 25 cm lead and 12 V operation
- ColorBlack
- TypeFan only
- Fan Size80mm
- Bearing TypeBall
- Power Connector3 Pin
- LEDNo
- 80 mm frame fits compact CPU cooler builds
- Dual ball bearings extend fan service life
- 12 V DC power with 0.57 A current draw
- Three-pin connector enables motherboard speed control
- 25 cm lead reaches most board headers
Compact 80 mm replacement fan
The Delta FFB0812VHE is a 12 V DC fan designed for CPU air coolers that require an 80 mm frame. It connects through a standard three-pin header and draws 0.57 A in normal operation. The 25 cm lead reaches most motherboard headers without extension cables.
Airflow capacity and limits
Dual ball bearings support continuous running at the rated current while the 1.35 A peak rating covers brief start-up surges. The 38 mm thickness fits standard 8038 mounting patterns but leaves no room for taller heatsinks that need a slimmer profile. Cooling headroom is defined by the single-fan design rather than a multi-fan array.
Upgrade path and fit
This unit replaces worn or noisy 80 mm fans that use the same three-pin interface and 80×80×38 mm footprint. The jump is worthwhile when the original sleeve-bearing fan has developed rattle or reduced speed. Builders who need PWM control or a different voltage must look elsewhere because the connector and voltage are fixed.
Ciri-ciri utama
- 80 mm frame fits compact CPU cooler builds
- Dual ball bearings extend fan service life
- 12 V DC power with 0.57 A current draw
- Three-pin connector enables motherboard speed control
- 25 cm lead reaches most board headers
Spesifikasi
| Model | FFB0812VHE |
|---|---|
| Color | Black |
| Type | Fan only |
| Fan Size | 80mm |
| Bearing Type | Ball |
| Power Connector | 3 Pin |
| LED | No |
Soalan tentang produk ini
Will the 80mm Delta FFB0812VHE fit on my older motherboard that still uses a 3-pin fan header?
Yes, the cooler connects through a standard 3-pin connector and runs on 12V DC, drawing 0.57A from the motherboard header.
How can I confirm the dual ball bearing fan is spinning correctly once installed?
The 3-pin connector carries a tachometer signal so the BIOS or monitoring software will report the fan speed in real time.
Does the package include mounting hardware for a CPU socket or only the 80mm fan itself?
The unit is supplied as a fan only with a 25cm lead; any mounting brackets, screws or heatsink base must be purchased separately.
Juga di rak ini
Pelanggan turut membandingkan
Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
USD 0.82
0.00001051BTC
Ada stok