Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk

OWC

OWC 2S1D42R808GB 8GB DDR4 2133MHz CL15 1.2V 260-pin SODIMM for HP Z1 Workstation G3 memory upgrade

SKU CH-D5GY-R2KAY

8GB DDR4 2133MHz CL15 1.2V 260-pin SODIMM adds 8GB of system-specific memory to an HP Z1 Workstation G3

  • Capacity8GB
  • Type260-Pin DDR4 Non-ECC SODIMM
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.2V
  • ECCNo
  • 8GB capacity adds headroom for multitasking
  • DDR4 2133MHz speed matches system specification
  • CL15 latency and 1.2V voltage meet JEDEC standard
  • 260-pin SODIMM form factor fits HP Z1 Workstation G3
  • Non-ECC unbuffered 2Rx8 design ensures stable operation

System-Specific DDR4 SODIMM

This 8 GB module is built for the HP Z1 Workstation G3 and follows the JEDEC DDR4 2133 standard. It is a non-ECC, unbuffered 260-pin SODIMM that installs as a straightforward DIY upgrade.

Capacity and headroom

The single 8 GB stick adds usable memory for everyday multitasking, larger documents and moderate creative workloads. It will not extend past the workstation’s maximum supported memory or enable dual-channel bandwidth beyond what the platform provides.

DDR4 2133 interface limits

The PC4-17000 rating sets a hard ceiling at 2133 MT/s with CL15 latency at 1.2 V. Systems that require ECC, registered modules, higher speeds or lower latencies cannot use this module.

Ciri-ciri utama

  • 8GB capacity adds headroom for multitasking
  • DDR4 2133MHz speed matches system specification
  • CL15 latency and 1.2V voltage meet JEDEC standard
  • 260-pin SODIMM form factor fits HP Z1 Workstation G3
  • Non-ECC unbuffered 2Rx8 design ensures stable operation

Spesifikasi

BrandOWC
Part Number2S1D42R808GB
Capacity8GB
Type260-Pin DDR4 Non-ECC SODIMM
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemHP Z1 Workstation G3

Versi lain model ini

5 lagi dalam julat yang sama

Keluarga yang sama, memori, penyejuk atau kelajuan jam yang berbeza — bandingkan sebelum membuat keputusan.

Soalan tentang produk ini

Will this 260-pin DDR4 SODIMM run alongside the existing 2133 MHz modules in my HP Z1 Workstation G3?

Yes, it matches the DDR4 2133 PC4-17000 CL15 1.2V spec of the factory memory, so the system will clock all sticks to the same speed and timings.

How can I confirm the 8 GB module is detected at 2133 MHz with CL15 after installation?

Open Task Manager or BIOS and verify the slot shows 8 GB, 2133 MHz, and CAS latency 15; CPU-Z will also report 2Rx8 rank and 1.2 V operation.

Does the box contain only the SODIMM or are tools and an anti-static strap included?

Only the 260-pin DDR4 SODIMM is supplied; no screwdriver, wrist strap or extra components are bundled.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.