Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk
Brass rotary elbow fitting with male and female G 1/4 threads, 30 degree angle

PrimoChill

PrimoChill Male to Female G 1/4in 30 Degree SX Rotary Elbow Fitting diy cooling

SKU CH-A010-RQMTN

A coated-brass rotary elbow redirects tubing runs 30 degrees from the mount with male and female G 1/4 threads

  • TypeCPU Block

Option UV Red

Lihat 10 konfigurasi lagi

Versi yang dicoret wujud, tetapi tidak tersedia di sini.

  • Rotary joint redirects tubing 30 degrees from mount
  • Male G 1/4 and Female G 1/4 threads fit standard loops
  • Coated brass body resists corrosion in liquid cooling
  • 20-year US brand focused on water-cooling craftsmanship
  • Includes installed O-ring on male side for immediate seal

PrimoChill G 1/4 Rotary Elbow

The PrimoChill Male to Female G 1/4in 30 Degree SX Rotary Elbow Fitting redirects tubing runs in custom liquid-cooling loops. Its coated brass body joins a male G 1/4 thread to a female G 1/4 thread. The rotary joint lets you aim the connection up to 30 degrees from the mounting point. One fitting and a pre-installed O-ring on the male side are included.

Verify thread compatibility and clearance

Confirm that every component in your loop uses G 1/4 threads before ordering. Measure the space around the target port to ensure the elbow and its rotary range will not contact nearby hardware. The warning notes that rotary joints can dislodge after movement, so plan for periodic leak testing after any adjustment.

Fits custom loops with standard G 1/4 ports

The fitting integrates into any open-loop system that uses G 1/4 male and female ports, such as radiators, blocks, reservoirs or pumps. It frees tubing from sharp bends by providing a controlled 30-degree offset. Pressure valves are recommended alongside rotary fittings to reduce the risk of seal disengagement.

Ciri-ciri utama

  • Rotary joint redirects tubing 30 degrees from mount
  • Male G 1/4 and Female G 1/4 threads fit standard loops
  • Coated brass body resists corrosion in liquid cooling
  • 20-year US brand focused on water-cooling craftsmanship
  • Includes installed O-ring on male side for immediate seal

Spesifikasi

TypeCPU Block

Versi lain model ini

5 lagi dalam julat yang sama

Keluarga yang sama, memori, penyejuk atau kelajuan jam yang berbeza — bandingkan sebelum membuat keputusan.

Soalan tentang produk ini

Does the PrimoChill 30-degree rotary elbow come with an O-ring or do I need to buy one separately?

One installed O-ring on the male threaded side is included in the box; no separate seal purchase is required.

Should I choose a different angle fitting or is the 30-degree SX version the right one for tight tubing bends?

The 30-degree SX rotary elbow is designed specifically for redirecting tubing runs at unconventional angles, and its rotary function lets you aim the connection any direction within that 30-degree offset.

Will the coated brass male and female G 1/4 threads seal reliably inside a custom loop?

The fitting uses coated brass with male and female G 1/4 threads; the supplier notes that rotary joints can rarely dislodge after movement, so they recommend pressing the joints back in, rotating them, and leak-testing before use.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.