Приемаме криптовалута — така монетите, които притежавате, могат да купят истински хардуер.Платете с крипто, похарчете го за истински хардуер. Безплатна застрахована доставка по целия свят над 399 $. Неутрални кашони без марка, изпратени от Германия.Безплатна застрахована доставка над 399 $. Курсът Ви е заключен за 30 минути веднага след отварянето на касата.Курс, заключен за 30 минути. Всеки артикул е запечатан, серийният му номер е проверен, и е покрит с 24-месечна гаранция.Запечатан, 24-месечна гаранция.

Проследени артикули Вход
Brass rotary elbow fitting with male and female G 1/4 threads, 30 degree angle

PrimoChill

PrimoChill Male to Female G 1/4in 30 Degree SX Rotary Elbow Fitting diy cooling

SKU CH-A010-RQMTN

A coated-brass rotary elbow redirects tubing runs 30 degrees from the mount with male and female G 1/4 threads

  • TypeCPU Block

Option UV Red

Вижте още 10 конфигурации

Зачертаните версии съществуват, но не се предлагат тук.

  • Rotary joint redirects tubing 30 degrees from mount
  • Male G 1/4 and Female G 1/4 threads fit standard loops
  • Coated brass body resists corrosion in liquid cooling
  • 20-year US brand focused on water-cooling craftsmanship
  • Includes installed O-ring on male side for immediate seal

PrimoChill G 1/4 Rotary Elbow

The PrimoChill Male to Female G 1/4in 30 Degree SX Rotary Elbow Fitting redirects tubing runs in custom liquid-cooling loops. Its coated brass body joins a male G 1/4 thread to a female G 1/4 thread. The rotary joint lets you aim the connection up to 30 degrees from the mounting point. One fitting and a pre-installed O-ring on the male side are included.

Verify thread compatibility and clearance

Confirm that every component in your loop uses G 1/4 threads before ordering. Measure the space around the target port to ensure the elbow and its rotary range will not contact nearby hardware. The warning notes that rotary joints can dislodge after movement, so plan for periodic leak testing after any adjustment.

Fits custom loops with standard G 1/4 ports

The fitting integrates into any open-loop system that uses G 1/4 male and female ports, such as radiators, blocks, reservoirs or pumps. It frees tubing from sharp bends by providing a controlled 30-degree offset. Pressure valves are recommended alongside rotary fittings to reduce the risk of seal disengagement.

Акценти

  • Rotary joint redirects tubing 30 degrees from mount
  • Male G 1/4 and Female G 1/4 threads fit standard loops
  • Coated brass body resists corrosion in liquid cooling
  • 20-year US brand focused on water-cooling craftsmanship
  • Includes installed O-ring on male side for immediate seal

Спецификации

TypeCPU Block

Други версии на този модел

5 още от същата серия

Същото семейство, различна памет, охладител или честота — сравнете, преди да решите.

Въпроси за този артикул

Does the PrimoChill 30-degree rotary elbow come with an O-ring or do I need to buy one separately?

One installed O-ring on the male threaded side is included in the box; no separate seal purchase is required.

Should I choose a different angle fitting or is the 30-degree SX version the right one for tight tubing bends?

The 30-degree SX rotary elbow is designed specifically for redirecting tubing runs at unconventional angles, and its rotary function lets you aim the connection any direction within that 30-degree offset.

Will the coated brass male and female G 1/4 threads seal reliably inside a custom loop?

The fitting uses coated brass with male and female G 1/4 threads; the supplier notes that rotary joints can rarely dislodge after movement, so they recommend pressing the joints back in, rotating them, and leak-testing before use.

Още от този рафт

Често сравнявани заедно

Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.