Приемаме криптовалута — така монетите, които притежавате, могат да купят истински хардуер.Платете с крипто, похарчете го за истински хардуер. Безплатна застрахована доставка по целия свят над 399 $. Неутрални кашони без марка, изпратени от Германия.Безплатна застрахована доставка над 399 $. Курсът Ви е заключен за 30 минути веднага след отварянето на касата.Курс, заключен за 30 минути. Всеки артикул е запечатан, серийният му номер е проверен, и е покрит с 24-месечна гаранция.Запечатан, 24-месечна гаранция.

Проследени артикули Вход
Brass 60-degree rotary elbow fitting male female G 1/4in

PrimoChill

PrimoChill 60 Degree SX Rotary Elbow Fitting G 1/4in Male Female diy cooling

SKU CH-E56S-X8NGS

A 60-degree rotary elbow fitting redirects custom-loop tubing at unconventional angles with a coated brass body and G 1/4 male-to-female threads

  • TypeCPU Block

Option UV Green

Вижте още 10 конфигурации

Зачертаните версии съществуват, но не се предлагат тук.

  • Redirects tubing runs at unconventional angles with 60-degree rotary elbow
  • Rotary function aims connection in any direction 60 degrees from mount
  • Coated brass construction provides durable corrosion-resistant fitting
  • Male and female G 1/4 threads ensure standard water-cooling compatibility
  • Includes installed O-ring on male threaded side for immediate seal

Quick 60° Loop Redirect

This PrimoChill rotary elbow fitting changes a G 1/4 male port into a female port angled 60 degrees from the mount. The SX rotary joint lets you aim the connection in any direction before tightening, making tight tubing runs around components straightforward. Coated brass construction resists corrosion inside custom water-cooling loops.

Rotary Freedom With One Seal

The fitting ships with an O-ring already installed on the male threaded side so you can assemble the loop immediately. Rotary action removes the need to calculate exact bend radii for hard tubing or fight kinks in soft tubing. A pressure valve elsewhere in the loop is advised because the moving joint can, on rare occasions, dislodge and break the seal if disturbed.

For Builders Needing Angular Flexibility

This suits custom-loop builders who must route tubing at unconventional angles around graphics cards, reservoirs or motherboard heatsinks. It is not for installers who want a permanent rigid joint with zero maintenance, nor for loops that cannot accommodate a pressure valve or periodic joint checks.

Акценти

  • Redirects tubing runs at unconventional angles with 60-degree rotary elbow
  • Rotary function aims connection in any direction 60 degrees from mount
  • Coated brass construction provides durable corrosion-resistant fitting
  • Male and female G 1/4 threads ensure standard water-cooling compatibility
  • Includes installed O-ring on male threaded side for immediate seal

Спецификации

TypeCPU Block

Други версии на този модел

5 още от същата серия

Същото семейство, различна памет, охладител или честота — сравнете, преди да решите.

Въпроси за този артикул

Will the coated brass material or the installed O-ring on the male G 1/4 thread need replacement over time?

The coated brass body is durable for long-term loop use. The installed O-ring on the male G 1/4 thread is a wear item; keep spares and replace it if you see weeping or during routine loop maintenance.

What is the first limit that appears when the rotary joint is adjusted repeatedly under pressure?

The 60-degree rotary joint can dislodge if moved often, which disengages the seals. The manufacturer advises pressing the joints back in, rotating them, then pressure-testing before reuse.

How much heat or noise does this fitting add when the loop runs continuously?

The fitting adds no noise and negligible heat; it is a passive brass adapter. The only operational concern is the rotary seal — use a pressure valve and check for leaks after any repositioning.

Още от този рафт

Често сравнявани заедно

Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.