Replace Power
Replace Power RPSU-C99-77 power supply
ATX power supply replaces legacy eMachines units with switchable 115 / 230 V input and reduced depth
- ColorGrey
- TypeATX
- Fans1
- Weight2.5
- Replaces legacy eMachines models including T2040 T2042 T2080 T1842 T2085 T2200
- Switchable input voltage 115 V or 230 V for worldwide use
- Reduced depth 5.9 in height 3.4 in width fits tight cases
- Over current over power over voltage and short circuit protection safeguards components
- Includes SATA ATX 12V and LP4 connectors for drives and motherboard
Direct replacement for eMachines desktops
This Replace Power RPSU-C99-77 is an ATX power supply built to replace the original unit in eMachines T2040, T2042, T2080, T1842, T2085 and T2200 systems. It accepts 115 V or 230 V input and includes a single cooling fan. The grey enclosure measures 5.9 inches in height and 3.4 inches in width with a reduced depth for tighter chassis fit.
Suits owners restoring legacy eMachines PCs
Buyers needing a like-for-like ATX replacement with the original connector mix will find the required ATX, 12 V ATX, SATA and peripheral leads included. Systems that demand higher total wattage, additional PCIe power connectors or modern standby features are not served by this unit.
Connector complement decides fit
The supply provides one SATA connector, one 20-pin ATX connector, one 12 V ATX connector, two large peripheral connectors and one 6-inch small peripheral connector. Verify that this exact set matches the motherboard and drive requirements of the target machine before purchase.
Ciri-ciri utama
- Replaces legacy eMachines models including T2040 T2042 T2080 T1842 T2085 T2200
- Switchable input voltage 115 V or 230 V for worldwide use
- Reduced depth 5.9 in height 3.4 in width fits tight cases
- Over current over power over voltage and short circuit protection safeguards components
- Includes SATA ATX 12V and LP4 connectors for drives and motherboard
Spesifikasi
| Brand | Replace Power |
|---|---|
| Model | RPSU-C99-77 |
| Color | Grey |
| Type | ATX |
| Fans | 1 |
| Weight | 2.5 |
Soalan tentang produk ini
How do I confirm the RPSU-C99-77 is working after installation?
The unit powers on when the system starts; the 80 mm fan spins and the motherboard receives power through the 20+4 pin ATX connector.
What connectors come with the RPSU-C99-77 and what must I source separately?
Included are one SATA, one 20+4 pin ATX, one 12 V ATX, two large peripheral and one 6-inch small peripheral connector; no extra cables are required for the listed eMachines models.
Which Replace Power model replaces the eMachines T2040, T2042, T2080, T1842, T2085 and T2200?
The RPSU-C99-77 is the direct replacement for all six eMachines models listed.
Juga di rak ini
Pelanggan turut membandingkan
Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.



