Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Grey ATX power supply unit with single fan and reduced depth

Replace Power

Replace Power RPSU-C99-77 power supply

SKU CH-0QBJ-9R281 MPN RPSU-C99-77

ATX power supply replaces legacy eMachines units with switchable 115 / 230 V input and reduced depth

  • ColorGrey
  • TypeATX
  • Fans1
  • Weight2.5
  • Replaces legacy eMachines models including T2040 T2042 T2080 T1842 T2085 T2200
  • Switchable input voltage 115 V or 230 V for worldwide use
  • Reduced depth 5.9 in height 3.4 in width fits tight cases
  • Over current over power over voltage and short circuit protection safeguards components
  • Includes SATA ATX 12V and LP4 connectors for drives and motherboard

Direct replacement for eMachines desktops

This Replace Power RPSU-C99-77 is an ATX power supply built to replace the original unit in eMachines T2040, T2042, T2080, T1842, T2085 and T2200 systems. It accepts 115 V or 230 V input and includes a single cooling fan. The grey enclosure measures 5.9 inches in height and 3.4 inches in width with a reduced depth for tighter chassis fit.

Suits owners restoring legacy eMachines PCs

Buyers needing a like-for-like ATX replacement with the original connector mix will find the required ATX, 12 V ATX, SATA and peripheral leads included. Systems that demand higher total wattage, additional PCIe power connectors or modern standby features are not served by this unit.

Connector complement decides fit

The supply provides one SATA connector, one 20-pin ATX connector, one 12 V ATX connector, two large peripheral connectors and one 6-inch small peripheral connector. Verify that this exact set matches the motherboard and drive requirements of the target machine before purchase.

Kohokohdat

  • Replaces legacy eMachines models including T2040 T2042 T2080 T1842 T2085 T2200
  • Switchable input voltage 115 V or 230 V for worldwide use
  • Reduced depth 5.9 in height 3.4 in width fits tight cases
  • Over current over power over voltage and short circuit protection safeguards components
  • Includes SATA ATX 12V and LP4 connectors for drives and motherboard

Tekniset tiedot

BrandReplace Power
ModelRPSU-C99-77
ColorGrey
TypeATX
Fans1
Weight2.5

Kysymyksiä tästä tuotteesta

How do I confirm the RPSU-C99-77 is working after installation?

The unit powers on when the system starts; the 80 mm fan spins and the motherboard receives power through the 20+4 pin ATX connector.

What connectors come with the RPSU-C99-77 and what must I source separately?

Included are one SATA, one 20+4 pin ATX, one 12 V ATX, two large peripheral and one 6-inch small peripheral connector; no extra cables are required for the listed eMachines models.

Which Replace Power model replaces the eMachines T2040, T2042, T2080, T1842, T2085 and T2200?

The RPSU-C99-77 is the direct replacement for all six eMachines models listed.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.