Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk
Black standalone USB duplicator with LCD screen and 79 slots

Systor

Systor SYSUSB30100-79 1 to 79 USB 3.0/3.1 Duplicator

SKU CH-AGWY-MDCHP

Standalone USB duplicator copies up to 79 drives at 100 MB/s with bit-by-bit verification and DoD-compliant erase

  • TypeUSB Flash Drive Duplicator
  • Target1 to 79
  • Buffer Memory256M
  • Supported MediaUSB 1.1, USB 2.0, USB 3.0, USB 3.1
  • Data Transfer Rate100MB/sec
  • Language SupportEnglish or Japanese

Target Size 1 to 79

Lihat 7 konfigurasi lagi

Versi yang dicoret wujud, tetapi tidak tersedia di sini.

DATA TRANSFER RATE USB 3.0/3.1 - 6GB/min [100MB/sec]

  • Standalone operation eliminates the need for a computer or software
  • Copies up to 79 USB drives simultaneously from a single source
  • Asynchronous mode lets each channel load, unload and copy independently
  • Bit-for-bit hardware compare verifies every duplication for data integrity
  • DoD-compliant erase function sanitises drives to recognised security standards

Systor USB 3.1 Duplicator for 79 Targets

This standalone duplicator copies up to 79 USB flash drives simultaneously without a computer. It supports USB 1.1, 2.0, 3.0 and 3.1 media with a 256M buffer. Operation is managed through a four-key LCD interface in English or Japanese. The unit runs on 115V or 230V power.

Suited for IT teams duplicating flash drives

The asynchronous mode lets each slot load, unload and copy independently for continuous throughput. Quick copy handles FAT16, FAT32, NTFS and Linux EXT2/3/4 file systems while whole-media mode duplicates any format bit-for-bit. Buyers who need to duplicate internal drives or non-USB media should look at a different device.

79 target ports with 100MB/sec transfer rate

Each channel reaches up to 100MB per second for rapid duplication cycles. The hardware compare function verifies every bit after copying. Three erase modes including a DoD-compliant option sanitise drives before reuse.

Ciri-ciri utama

  • Standalone operation eliminates the need for a computer or software
  • Copies up to 79 USB drives simultaneously from a single source
  • Asynchronous mode lets each channel load, unload and copy independently
  • Bit-for-bit hardware compare verifies every duplication for data integrity
  • DoD-compliant erase function sanitises drives to recognised security standards

Spesifikasi

BrandSystor
ModelSYSUSB30100-79
TypeUSB Flash Drive Duplicator
Target1 to 79
Buffer Memory256M
Supported MediaUSB 1.1, USB 2.0, USB 3.0, USB 3.1
Data Transfer Rate100MB/sec
Language SupportEnglish or Japanese
DisplayLCD Screen
Operating TypeStandalone
Panel ColorBlack
Load TypeSlot
FeaturesQuick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats
Environmental SpecOperating Humidity: 15% ~ 90%
Power Supply115V / 230V

Versi lain model ini

5 lagi dalam julat yang sama

Keluarga yang sama, memori, penyejuk atau kelajuan jam yang berbeza — bandingkan sebelum membuat keputusan.

Soalan tentang produk ini

How do I set up the duplicator for the first time, and what step do people often miss?

Plug the unit into 115V or 230V power, insert the source drive into the first slot and target drives into the remaining 79 slots, then use the four-key LCD menu to choose copy mode; the step often missed is running the self-diagnostic that starts automatically on power-on before beginning any copy job.

What maintenance or replacement will the duplicator need over time?

The only user-serviceable items are the 79 USB slots, which can wear from repeated insertions, and the internal cooling fans that should be cleared of dust periodically; no firmware updates are required because the duplicator operates completely standalone.

What limit appears first during a long, continuous copy session?

Sustained duplication is capped at 100MB/sec (6GB/min) per channel, so the aggregate throughput ceiling is reached before any thermal throttle; the 256MB buffer and standalone multi-core processor keep each of the 79 ports at that rate without slowdown.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.