Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk

Systor

Systor SYSUSB30100-31 USB 3.0/3.1 Duplicator 1 to 31

SKU CH-N54D-93E8E

Standalone duplicator copies one USB drive to 31 targets at up to 100 MB/s with bit-for-bit compare and DoD-compliant erase

  • TypeUSB Flash Drive Duplicator
  • Target1 to 31
  • Buffer Memory256M
  • Supported MediaUSB 1.1, USB 2.0, USB 3.0, USB 3.1
  • Data Transfer Rate100MB/sec
  • Language SupportEnglish or Japanese

Versi yang dicoret wujud, tetapi tidak tersedia di sini.

DATA TRANSFER RATE USB 3.0/3.1 - 6GB/min [100MB/sec]

  • Standalone operation with no PC required
  • Copies up to 31 USB drives simultaneously
  • 100 MB/s transfer rate for fast duplication
  • Bit-by-bit compare verifies every copy
  • LCD screen with four-key control interface

1-to-31 USB duplicator for high-volume copying

The Systor SYSUSB30100-31 duplicates one source drive to up to 31 targets simultaneously. It operates as a fully standalone unit with no host computer or software required. The four-button LCD interface lets operators start, monitor and verify jobs directly on the device. This suits IT departments, duplication services and manufacturers that need to provision large batches of flash media quickly.

Asynchronous copy, bit-level verify and secure erase

Each of the 31 channels loads, copies and unloads independently so a slow target never blocks the others. The controller performs bit-by-bit comparison after every duplication run to confirm data integrity. A built-in erase function meets DoD sanitisation standards and three formatting modes — Auto, FAT and FAT32 — prepare fresh media in seconds. All file systems including FAT16, FAT32, NTFS and Linux EXT2/3/4 are copied sector-for-sector regardless of format.

Slot-load chassis with dual-voltage power supply

The black front panel uses slot-loading ports that accept USB 1.1, 2.0, 3.0 and 3.1 drives without caddies or adapters. An internal 256 MB buffer sustains transfer rates up to 100 MB per second across all channels. The unit runs on 115 V or 230 V mains and is rated for 15 % to 90 % operating humidity. Buyers who need to duplicate fewer than two drives at a time or who require network-connected management will not find those features here.

Ciri-ciri utama

  • Standalone operation with no PC required
  • Copies up to 31 USB drives simultaneously
  • 100 MB/s transfer rate for fast duplication
  • Bit-by-bit compare verifies every copy
  • LCD screen with four-key control interface

Spesifikasi

BrandSystor
ModelSYSUSB30100-31
TypeUSB Flash Drive Duplicator
Target1 to 31
Buffer Memory256M
Supported MediaUSB 1.1, USB 2.0, USB 3.0, USB 3.1
Data Transfer Rate100MB/sec
Language SupportEnglish or Japanese
DisplayLCD Screen
Operating TypeStandalone
Panel ColorBlack
Load TypeSlot
FeaturesQuick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats
Environmental SpecOperating Humidity: 15% ~ 90%
Power Supply115V / 230V

Versi lain model ini

5 lagi dalam julat yang sama

Keluarga yang sama, memori, penyejuk atau kelajuan jam yang berbeza — bandingkan sebelum membuat keputusan.

Soalan tentang produk ini

Will the LCD panel or control buttons need servicing after heavy daily use?

The unit is a standalone duplicator with a 4‑key LCD interface and no PC software; the only user‑serviceable items are the USB slots themselves.

What limits continuous throughput when all 31 ports are active?

The shared 100 MB/sec (6 GB/min) bus bandwidth is divided across the active channels, so aggregate speed drops as more targets copy simultaneously.

How much heat and power does the duplicator draw during an all‑day copy run?

It runs on a universal 115 V/230 V supply and is rated for 15 %–90 % operating humidity; no fan noise or thermal figures are published.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.