暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black rectangular duplicator unit with 31 vertical USB slots and front LCD screen

Systor

Systor SYSUSB30100-31 USB 3.0/3.1 Duplicator 1 to 31

SKU CH-N54D-93E8E

Standalone duplicator copies one USB drive to 31 targets at up to 100 MB/s with bit-for-bit compare and DoD-compliant erase

  • TypeUSB Flash Drive Duplicator
  • Target1 to 31
  • Buffer Memory256M
  • Supported MediaUSB 1.1, USB 2.0, USB 3.0, USB 3.1
  • Data Transfer Rate100MB/sec
  • Language SupportEnglish or Japanese

Target Size 1 to 31

他に 7点の構成を表示

取り消し線の付いたバージョンは存在しますが、こちらでは取り扱っていません。

DATA TRANSFER RATE USB 3.0/3.1 - 6GB/min [100MB/sec]

  • Standalone operation with no PC required
  • Copies up to 31 USB drives simultaneously
  • 100 MB/s transfer rate for fast duplication
  • Bit-by-bit compare verifies every copy
  • LCD screen with four-key control interface

1-to-31 USB duplicator for high-volume copying

The Systor SYSUSB30100-31 duplicates one source drive to up to 31 targets simultaneously. It operates as a fully standalone unit with no host computer or software required. The four-button LCD interface lets operators start, monitor and verify jobs directly on the device. This suits IT departments, duplication services and manufacturers that need to provision large batches of flash media quickly.

Asynchronous copy, bit-level verify and secure erase

Each of the 31 channels loads, copies and unloads independently so a slow target never blocks the others. The controller performs bit-by-bit comparison after every duplication run to confirm data integrity. A built-in erase function meets DoD sanitisation standards and three formatting modes — Auto, FAT and FAT32 — prepare fresh media in seconds. All file systems including FAT16, FAT32, NTFS and Linux EXT2/3/4 are copied sector-for-sector regardless of format.

Slot-load chassis with dual-voltage power supply

The black front panel uses slot-loading ports that accept USB 1.1, 2.0, 3.0 and 3.1 drives without caddies or adapters. An internal 256 MB buffer sustains transfer rates up to 100 MB per second across all channels. The unit runs on 115 V or 230 V mains and is rated for 15 % to 90 % operating humidity. Buyers who need to duplicate fewer than two drives at a time or who require network-connected management will not find those features here.

特長

  • Standalone operation with no PC required
  • Copies up to 31 USB drives simultaneously
  • 100 MB/s transfer rate for fast duplication
  • Bit-by-bit compare verifies every copy
  • LCD screen with four-key control interface

仕様

BrandSystor
ModelSYSUSB30100-31
TypeUSB Flash Drive Duplicator
Target1 to 31
Buffer Memory256M
Supported MediaUSB 1.1, USB 2.0, USB 3.0, USB 3.1
Data Transfer Rate100MB/sec
Language SupportEnglish or Japanese
DisplayLCD Screen
Operating TypeStandalone
Panel ColorBlack
Load TypeSlot
FeaturesQuick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats
Environmental SpecOperating Humidity: 15% ~ 90%
Power Supply115V / 230V

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will the LCD panel or control buttons need servicing after heavy daily use?

The unit is a standalone duplicator with a 4‑key LCD interface and no PC software; the only user‑serviceable items are the USB slots themselves.

What limits continuous throughput when all 31 ports are active?

The shared 100 MB/sec (6 GB/min) bus bandwidth is divided across the active channels, so aggregate speed drops as more targets copy simultaneously.

How much heat and power does the duplicator draw during an all‑day copy run?

It runs on a universal 115 V/230 V supply and is rated for 15 %–90 % operating humidity; no fan noise or thermal figures are published.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。