暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black standalone USB duplicator with LCD screen and 127 slots

Systor

Systor SYSUSB30100-127 1 to 127 USB 3.0/3.1 Duplicator

SKU CH-X557-SQ384

Standalone duplicator copies up to 127 USB drives at 100 MB/s with bit-for-bit verification and DoD-compliant erase

  • TypeUSB Flash Drive Duplicator
  • Target1 to 127
  • Buffer Memory256M
  • Supported MediaUSB 1.1, USB 2.0, USB 3.0, USB 3.1
  • Data Transfer Rate100MB/sec
  • Language SupportEnglish or Japanese

Target Size 1 to 127

他に 7点の構成を表示

取り消し線の付いたバージョンは存在しますが、こちらでは取り扱っていません。

DATA TRANSFER RATE USB 3.0/3.1 - 6GB/min [100MB/sec]

  • Standalone operation — no computer or software required
  • Copies up to 127 USB flash drives simultaneously
  • 100 MB/s transfer rate for fast duplication
  • Bit-by-bit compare verifies every copy
  • LCD interface with synchronous and asynchronous modes

Standalone USB 3.0/3.1 Duplicator for High-Volume

This unit copies up to 127 USB flash drives simultaneously without a host computer or software. It accepts USB 1.1, 2.0, 3.0 and 3.1 media and transfers data at up to 100 MB per second. A 256 MB buffer and multi-core processor manage the workload. The four-button LCD interface lets operators start jobs in English or Japanese.

Sustained Throughput with Asynchronous Channel

Each of the 127 channels loads, unloads and copies independently, so a slow target does not stall the rest of the batch. Bit-for-bit comparison verifies every copy after the transfer finishes. Quick-copy mode duplicates only used space on FAT16, FAT32, NTFS and Linux EXT2/3/4 volumes, while whole-media mode clones the entire device regardless of format.

Slot-Load Chassis with DoD-Compliant Erase Functions

The black slot-load panel feeds drives directly into the duplicator; no trays or caddies are required. Three formatting options — Auto, FAT and FAT32 — prepare targets before duplication. A full-erase mode meets DoD data-sanitisation standards for secure decommissioning. The unit operates on 115 V or 230 V power and tolerates 15 % to 90 % relative humidity.

特長

  • Standalone operation — no computer or software required
  • Copies up to 127 USB flash drives simultaneously
  • 100 MB/s transfer rate for fast duplication
  • Bit-by-bit compare verifies every copy
  • LCD interface with synchronous and asynchronous modes

仕様

BrandSystor
ModelSYSUSB30100-127
TypeUSB Flash Drive Duplicator
Target1 to 127
Buffer Memory256M
Supported MediaUSB 1.1, USB 2.0, USB 3.0, USB 3.1
Data Transfer Rate100MB/sec
Language SupportEnglish or Japanese
DisplayLCD Screen
Operating TypeStandalone
Panel ColorBlack
Load TypeSlot
FeaturesQuick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats
Environmental SpecOperating Humidity: 15% ~ 90%
Power Supply115V / 230V

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How much power does the SYSUSB30100-127 draw when running all 127 ports continuously?

The unit operates on 115V or 230V mains power; no per-port or maximum wattage figure is published.

What must I already own to start duplicating with this unit?

Only the source USB flash drive and up to 127 target USB 1.1, 2.0, 3.0 or 3.1 drives; no computer or software is required.

Will the duplicator correctly copy older USB 1.1 or 2.0 drives alongside newer 3.0 and 3.1 media?

Yes — it supports USB 1.1, 2.0, 3.0 and 3.1 simultaneously and copies each at its native speed.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。