暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black standalone duplicator unit with thirty-one USB ports and an LCD screen

Systor

Systor SYS31EXH 1-to-31 USB Duplicator & Sanitizer

SKU CH-7SCP-P5ZK6

Standalone duplicator copies one USB flash drive or portable hard drive to up to 31 targets at 33 MB/s with a 256 MB buffer and LCD control

  • TypeDuplicator: USB flash drive to USB flash drive, USB flash dr
  • Target1 to 31
  • Buffer Memory256 MB
  • Supported MediaUSB 1.1, USB 2.0, USB 3.0, USB 3.1, USB 3.2, USB 3+ USB-powe
  • Data Transfer Rate33MB/s
  • Language SupportEnglish, Spanish, Portuguese, Japanese

Target Size 1 to 31

他に 7点の構成を表示

取り消し線の付いたバージョンは存在しますが、こちらでは取り扱っていません。

DATA TRANSFER RATE For USB-Powered Portable Hard Drives

  • Standalone operation — no computer or software required
  • Duplicate one source to 31 targets simultaneously
  • Asynchronous copy starts immediately when drives are inserted
  • Bit-by-bit duplication ensures exact data replication
  • Supports USB 1.1, 2.0, 3.0, 3.1, 3.2 and 3+ devices

Standalone 31-target USB duplicator

The Systor SYS31EXH copies one USB source to up to 31 targets without a host computer. It handles USB flash drives and USB-powered portable external hard drives in any combination. An onboard LCD and simple buttons let operators start, monitor and verify jobs directly on the unit. Asynchronous mode begins each target copy the moment a drive is seated, so the queue never stalls.

Thermal and power profile

The duplicator runs on 115V or 230V mains and draws power only for the active ports and its 256 MB buffer. No active cooling is described, so the chassis relies on passive airflow during continuous operation. The stated transfer ceiling is 33MB/s, a rate that keeps per-port current modest and avoids thermal throttling during long batch runs.

Bundled accessories and software impact

The package ships as a complete standalone appliance; no host software, drivers or licence keys are required. Included cables and power leads match the 31 target ports so every slot is ready immediately. Bit-by-bit duplication and multi-language menus (English, Spanish, Portuguese, Japanese) are baked into the firmware, removing any post-purchase configuration step.

特長

  • Standalone operation — no computer or software required
  • Duplicate one source to 31 targets simultaneously
  • Asynchronous copy starts immediately when drives are inserted
  • Bit-by-bit duplication ensures exact data replication
  • Supports USB 1.1, 2.0, 3.0, 3.1, 3.2 and 3+ devices

仕様

BrandSystor
ModelSYS31EXH
Part NumberSYS31EXH
TypeDuplicator:
USB flash drive to USB flash drive,
USB flash drive to USB-powered portable external hard drive,
USB-powered portable external hard drive to USB-powered portable external hard drive,
USB-powered portable external hard drive to USB flash drive
Target1 to 31
Buffer Memory256 MB
Supported MediaUSB 1.1, USB 2.0, USB 3.0, USB 3.1, USB 3.2, USB 3+
USB-powered portable external hard drive
Data Transfer Rate33MB/s
Language SupportEnglish, Spanish, Portuguese,
Japanese
DisplayLCD Screen
Operating TypeStandalone
Panel ColorBlack
FeaturesCOMPLETE STANDALONE : No computer or software needed
WARRANTY : 1 year parts, 3 years labor, lifetime technical support
ASYNCHRONOUS MODE : Duplication from master source port to blank target ports starts as soon as a source drive/device is inserted and a target drive/device is plugged into any target port
BIT-BY-BIT DUPLICATION : Performs a bit-by-bit copy from the USB-powered portable external source hard drive or USB flash drive
DUPLICATE USB FLASH DRIVE TO USB FLASH DRIVE : Copy from 1 single USB flash drive to USB flash drive(s)
DUPLICATE USB FLASH DRIVE TO USB-POWERED EXTERNAL
Power Supply115V or 230V
Package Contentssee pictures for details

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How do I start a copy job on the SYS31EXH and what step do users often miss?

Insert the source drive into the master port then plug each target drive into any of the 31 target ports; the unit begins duplicating automatically in asynchronous mode, but users sometimes forget to wait for the LCD to confirm every target is detected before pressing Start.

What part will need replacement first during heavy use?

The USB ports on the 31 target bays and the single source port endure repeated insertion cycles; the LCD backlight and internal SATA controller board are the next components that typically require service after extended operation.

What throughput ceiling appears first when running back-to-back duplication jobs?

The 33 MB/s maximum data transfer rate limits sustained copy speed regardless of whether the drives support USB 3.2 or USB 3.1; the 256 MB buffer helps burst transfers but cannot raise the continuous throughput ceiling.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。