暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black standalone USB duplicator with LCD screen and 79 target slots

Systor

Systor SYS-USBD-79 1 to 79 USB Duplicator

SKU CH-9CH9-7Z0CA

Standalone duplicator copies up to 79 USB drives simultaneously at 33 MB/s with bit-for-bit verification and DoD-compliant erase

  • TypeUSB Flash Drive Duplicator
  • Target1 to 79
  • Buffer Memory256 MB
  • Supported MediaUSB 1.1, USB 2.0, & USB 3.0
  • Data Transfer Rate33MB/s
  • Language SupportEnglish, Japanese, Spanish, Portuguese

Target Size 1 to 79

他に 7点の構成を表示

取り消し線の付いたバージョンは存在しますが、こちらでは取り扱っていません。

DATA TRANSFER RATE USB 2.0/2.1 - 2GB/min [33MB/sec]

  • Duplicates up to 79 USB drives simultaneously
  • Standalone operation requires no computer or software
  • Asynchronous copying lets each channel work independently
  • Bit-for-bit comparison verifies every copy automatically
  • Supports USB 1.1, 2.0 and 3.0 drives

1-to-79 USB Flash Duplicator

The Systor SYS-USBD-79 is a standalone duplicator that copies one source USB flash drive to up to seventy-nine targets simultaneously. It operates without a host computer and supports USB 1.1, 2.0 and 3.0 devices at speeds up to 33 MB/s. A 256 MB buffer and an LCD panel with four-button control manage synchronous or asynchronous copy modes.

Suits high-volume USB duplication.

This unit is built for organisations that need to replicate large batches of USB thumb drives quickly and securely, with bit-for-bit comparison and DoD-compliant erase functions. It does not accept SD cards, optical discs or internal SATA drives, and it cannot be managed over a network. Buyers who need to duplicate those media types or who require remote management should look at a different product class.

33 MB/s maximum copy throughput

The peak transfer rate of 33 MB/s determines how fast each target receives data, so it is the key figure for calculating total batch time. The duplicator draws power from a 115/230 V, 50/60 Hz, 400 W supply and connects to the source via a SATA interface.

特長

  • Duplicates up to 79 USB drives simultaneously
  • Standalone operation requires no computer or software
  • Asynchronous copying lets each channel work independently
  • Bit-for-bit comparison verifies every copy automatically
  • Supports USB 1.1, 2.0 and 3.0 drives

仕様

BrandSystor
ModelSYS-USBD-79
TypeUSB Flash Drive Duplicator
Target1 to 79
Buffer Memory256 MB
Supported MediaUSB 1.1, USB 2.0, & USB 3.0
Data Transfer Rate33MB/s
Language SupportEnglish, Japanese, Spanish, Portuguese
DisplayLCD Screen
Operating TypeStandalone
ConnectorSATA
Panel ColorBlack
Load TypeSlot
Key FeaturesSynchronous or Asynchronous mode
FeaturesQuick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats
Power Supply115/230 V, 50/60 Hz, 400 W

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Does the duplicator need a computer or software to operate?

The unit runs completely standalone with its own LCD screen and four-key control, so no PC or software is required.

Can I copy a USB 2.0 flash drive while other ports are running USB 3.0 drives?

Yes, the duplicator supports USB 1.1, 2.0 and 3.0 simultaneously, and asynchronous mode lets each channel load, unload and copy independently.

How do I verify that every target drive is an exact copy of the source?

After each job the built-in bit-for-bit hardware comparison runs automatically and the LCD reports pass or fail for every port.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。