暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black standalone USB duplicator with LCD screen and fifteen target slots

Systor

Systor SYS-USB30-15 1-to-15 USB 3.0/3.1 duplicator

SKU CH-TD30-4F4PP

Standalone duplicator copies up to 15 USB flash drives at once with 300 MB/s transfer speed and 18 GB/min throughput

  • TypeUSB Flash Drive Duplicator
  • Target1 to 15
  • Buffer Memory256M
  • Supported MediaUSB 1.1, USB 2.0, USB 3.0, USB 3.1
  • Data Transfer Rate300MB/s
  • Language SupportEnglish or Japanese

Target Size 1 to 15

他に 7点の構成を表示

取り消し線の付いたバージョンは存在しますが、こちらでは取り扱っていません。

DATA TRANSFER RATE USB 3.0/3.1 - 18GB/min [300MB/sec]

  • Copies up to 15 USB drives simultaneously
  • Achieves 18 GB per minute duplication speed
  • Operates standalone with no computer required
  • Supports USB 1.1 through USB 3.1 standards
  • Verifies copies with bit-by-bit comparison

Target and throughput

This duplicator copies one source USB drive to fifteen targets simultaneously, reaching up to 300 MB per second and eighteen gigabytes per minute. It operates standalone with an LCD and four-button control, so no host computer or software is required during duplication.

High-volume operators versus single-drive users

The fifteen-target layout suits IT departments, duplication houses or OEM lines that must provision many flash drives at once. Buyers who only need occasional single-drive copies or software-based imaging will find the hardware overhead unnecessary.

Asynchronous channel independence

Each of the fifteen channels loads, copies and unloads independently, so a slow target never blocks the others. This asynchronous behaviour is the specification that determines whether the unit matches a workflow that demands continuous, non-blocking throughput.

特長

  • Copies up to 15 USB drives simultaneously
  • Achieves 18 GB per minute duplication speed
  • Operates standalone with no computer required
  • Supports USB 1.1 through USB 3.1 standards
  • Verifies copies with bit-by-bit comparison

仕様

BrandSystor
ModelSYS-USB30-15
TypeUSB Flash Drive Duplicator
Target1 to 15
Buffer Memory256M
Supported MediaUSB 1.1, USB 2.0, USB 3.0, USB 3.1
Data Transfer Rate300MB/s
Language SupportEnglish or Japanese
DisplayLCD Screen
Operating TypeStandalone
Panel ColorBlack
Load TypeSlot
FeaturesQuick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats
Environmental SpecOperating Humidity: 15% ~ 90%
Power Supply115V / 230V

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How do I install the SYS-USB30-15 duplicator and what step do people often miss?

Plug the unit into 115V or 230V mains, insert the source USB drive into the top slot and up to 15 target drives into the lower slots, then press Start. The step often missed is selecting the correct copy mode — Quick Copy for FAT16, FAT32, NTFS or Linux EXT2/3/4, or Whole Media Copy for any other format — before starting.

What maintenance or replacement will the duplicator need later?

The unit has no user-serviceable parts; the LCD screen and slot mechanisms are built for continuous standalone operation. Only the power cord may need replacement if damaged, and the 256 MB buffer memory is soldered and not upgradeable.

What limit appears first during sustained high-speed copying?

The 300 MB/s aggregate transfer rate caps total throughput, so copying to all 15 targets simultaneously divides that bandwidth. Thermal limits from the operating humidity range of 15 % to 90 % can also throttle extended sessions.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。