暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black standalone USB duplicator with LCD screen and twenty-three target slots

Systor

Systor SYS-USB30-23 1-to-23 USB 3.0/3.1 Duplicator

SKU CH-AHVE-F057J

Standalone USB duplicator copies one source to 23 targets at up to 300 MB/s with bit-by-bit verification

  • TypeUSB Flash Drive Duplicator
  • Target1 to 23
  • Buffer Memory256M
  • Supported MediaUSB 1.1, USB 2.0, USB 3.0, USB 3.1
  • Data Transfer Rate300MB/s
  • Language SupportEnglish or Japanese

Target Size 1 to 23

他に 7点の構成を表示

取り消し線の付いたバージョンは存在しますが、こちらでは取り扱っていません。

DATA TRANSFER RATE USB 3.0/3.1 - 18GB/min [300MB/sec]

  • Copies up to 23 USB drives simultaneously
  • Standalone operation requires no computer or software
  • Achieves up to 18GB per minute copy speed
  • Supports USB 1.1, 2.0, 3.0 and 3.1 drives
  • Bit-by-bit compare verifies every duplication

Standalone 23-target USB duplicator

The Systor SYS-USB30-23 is a standalone USB 3.1 duplicator that copies one source drive to up to twenty-three targets without a host computer. It supports USB 1.1, 2.0, 3.0 and 3.1 media and reaches a maximum transfer rate of 300 MB/s with 256 MB of buffer memory. An LCD screen and four-button control panel manage synchronous or asynchronous copy modes.

IT teams and media labs needing high-volume USB

Organisations that regularly duplicate bootable drives, firmware images or data sets across many USB sticks will benefit from the asynchronous operation that lets each channel load, unload and copy independently. The unit handles FAT16, FAT32, NTFS and Linux EXT2/3/4 formats in quick-copy mode and falls back to whole-media bit-by-bit copying for other formats. Buyers who require duplication of interfaces other than USB, or who need more than twenty-three simultaneous targets, should consider a different platform.

23 asynchronous USB channels

The defining specification is the twenty-three independent copy channels that operate asynchronously, allowing continuous throughput up to 18 GB/min without waiting for the slowest target to finish. This channel count and the asynchronous architecture together determine whether the duplicator matches the required cloning volume.

特長

  • Copies up to 23 USB drives simultaneously
  • Standalone operation requires no computer or software
  • Achieves up to 18GB per minute copy speed
  • Supports USB 1.1, 2.0, 3.0 and 3.1 drives
  • Bit-by-bit compare verifies every duplication

仕様

BrandSystor
ModelSYS-USB30-23
TypeUSB Flash Drive Duplicator
Target1 to 23
Buffer Memory256M
Supported MediaUSB 1.1, USB 2.0, USB 3.0, USB 3.1
Data Transfer Rate300MB/s
Language SupportEnglish or Japanese
DisplayLCD Screen
Operating TypeStandalone
Panel ColorBlack
Load TypeSlot
FeaturesQuick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats
Environmental SpecOperating Humidity: 15% ~ 90%
Power Supply115V / 230V

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How many target ports does the SYS-USB30-23 provide for simultaneous copying?

The duplicator offers 23 target slots so you can copy one source drive to 23 destinations at once.

What is the sustained copy throughput and does the unit need active cooling?

It copies at up to 300 MB/s (18 GB/min) and runs from a standard 115 V or 230 V supply without a built-in fan.

Does the duplicator need a host PC or any installed software to operate?

No — it is a standalone unit with a 4-key LCD panel, so it works without a computer or extra software.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。