Systor SYSUSB30100-63 1 to 63 USB 3.0/3.1 Duplicator
- USB Flash Drive Dup…
- 1 to 63
เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน
Systor
Standalone USB duplicator copies one source to 23 targets at up to 300 MB/s with bit-by-bit verification
Target Size 1 to 23
ตัวเลือกที่ขีดฆ่าไว้มีอยู่จริง แต่ไม่มีจำหน่ายที่นี่
DATA TRANSFER RATE USB 3.0/3.1 - 18GB/min [300MB/sec]
The Systor SYS-USB30-23 is a standalone USB 3.1 duplicator that copies one source drive to up to twenty-three targets without a host computer. It supports USB 1.1, 2.0, 3.0 and 3.1 media and reaches a maximum transfer rate of 300 MB/s with 256 MB of buffer memory. An LCD screen and four-button control panel manage synchronous or asynchronous copy modes.
Organisations that regularly duplicate bootable drives, firmware images or data sets across many USB sticks will benefit from the asynchronous operation that lets each channel load, unload and copy independently. The unit handles FAT16, FAT32, NTFS and Linux EXT2/3/4 formats in quick-copy mode and falls back to whole-media bit-by-bit copying for other formats. Buyers who require duplication of interfaces other than USB, or who need more than twenty-three simultaneous targets, should consider a different platform.
The defining specification is the twenty-three independent copy channels that operate asynchronously, allowing continuous throughput up to 18 GB/min without waiting for the slowest target to finish. This channel count and the asynchronous architecture together determine whether the duplicator matches the required cloning volume.
| Brand | Systor |
|---|---|
| Model | SYS-USB30-23 |
| Type | USB Flash Drive Duplicator |
| Target | 1 to 23 |
| Buffer Memory | 256M |
| Supported Media | USB 1.1, USB 2.0, USB 3.0, USB 3.1 |
| Data Transfer Rate | 300MB/s |
| Language Support | English or Japanese |
| Display | LCD Screen |
| Operating Type | Standalone |
| Panel Color | Black |
| Load Type | Slot |
| Features | Quick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats |
| Environmental Spec | Operating Humidity: 15% ~ 90% |
| Power Supply | 115V / 230V |
รุ่นอื่นในตระกูลเดียวกัน
ตระกูลเดียวกัน แต่หน่วยความจำ คูลเลอร์ หรือสัญญาณนาฬิกาต่างกัน — เปรียบเทียบก่อนตัดสินใจ
The duplicator offers 23 target slots so you can copy one source drive to 23 destinations at once.
It copies at up to 300 MB/s (18 GB/min) and runs from a standard 115 V or 230 V supply without a built-in fan.
No — it is a standalone unit with a 4-key LCD panel, so it works without a computer or extra software.
อื่น ๆ ในหมวดนี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
สิ่งที่คุณใช้ชำระ และสิ่งที่คุณใช้อ่านราคา
ส่งจากกระเป๋าเงินของคุณเมื่อชำระเงิน
แสดงผลเท่านั้น — แคตตาล็อกสินค้าตั้งราคาเป็นดอลลาร์สหรัฐ
ไม่พบสกุลเงินที่ตรงกัน
เลือกภาษาที่ต้องการให้เว็บไซต์แสดงผล
ไม่พบภาษาที่ตรงกัน
ยังไม่เคยใช้งานใช่ไหม
มีบัญชีอยู่แล้วใช่ไหม
ไม่มีการรีเซ็ตแบบอัตโนมัติ ร้านนี้ไม่ส่งอีเมลใด ๆ จึงไม่มีลิงก์ใช้ครั้งเดียวให้ขอ ปล่อยที่อยู่อีเมลนี้ไว้ในบัญชี แล้วเจ้าหน้าที่จะดำเนินการให้ด้วยตนเอง
รับคำขอแล้ว
ไม่มีอะไรถูกส่งไปยังกล่องจดหมายของคุณ — ร้านนี้ไม่ส่งอีเมลใด ๆ เลย มีคนดำเนินการเรื่องนี้ให้ด้วยมือ
นึกออกแล้วใช่ไหม