Systor SYS-USB30-47 1 to 47 USB 3.0/3.1 Duplicator
- USB Flash Drive Dup…
- 1 to 47
เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน
Systor
Standalone USB flash drive duplicator copies one source to 63 targets at up to 300 MB/s with asynchronous operation and bit-by-bit verification
Target Size 1 to 63
ตัวเลือกที่ขีดฆ่าไว้มีอยู่จริง แต่ไม่มีจำหน่ายที่นี่
DATA TRANSFER RATE USB 3.0/3.1 - 18GB/min [300MB/sec]
The Systor SYS-USB30-63 is a standalone duplicator that copies one source USB drive to as many as sixty-three targets simultaneously. It supports USB 1.1, 2.0, 3.0 and 3.1 media and reaches transfer rates of 300MB/s. An LCD screen and four-button panel let operators select copy or erase modes without a host computer.
This unit suits organisations that need to duplicate large batches of flash drives in a single run, such as software distributors, training providers or IT departments deploying standard images. The asynchronous mode allows each slot to load, copy and unload independently so throughput stays high. Buyers who only need to copy a handful of drives at a time or who require interfaces beyond USB should consider a different device.
The single specification that determines fit is the sixty-three target ports combined with asynchronous copy mode. If a workflow demands simultaneous duplication to that many USB drives without a PC, this duplicator meets the requirement; if the maximum concurrent target count is lower, a smaller system will be more appropriate.
| Brand | Systor |
|---|---|
| Model | SYS-USB30-63 |
| Type | USB Flash Drive Duplicator |
| Target | 1 to 63 |
| Buffer Memory | 256M |
| Supported Media | USB 1.1, USB 2.0, USB 3.0, USB 3.1 |
| Data Transfer Rate | 300MB/s |
| Language Support | English or Japanese |
| Display | LCD Screen |
| Operating Type | Standalone |
| Panel Color | Black |
| Load Type | Slot |
| Features | Quick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats |
| Environmental Spec | Operating Humidity: 15% ~ 90% |
| Power Supply | 115V / 230V |
รุ่นอื่นในตระกูลเดียวกัน
ตระกูลเดียวกัน แต่หน่วยความจำ คูลเลอร์ หรือสัญญาณนาฬิกาต่างกัน — เปรียบเทียบก่อนตัดสินใจ
The duplicator accepts USB 1.1, USB 2.0, USB 3.0 and USB 3.1 flash drives, so any drive matching those standards will work.
Yes, the unit supports mixed USB 1.1, 2.0, 3.0 and 3.1 media simultaneously across its 63 target slots.
The LCD shows bit-by-bit compare results for every channel, letting you verify successful duplication at up to 300MB/s.
อื่น ๆ ในหมวดนี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
สิ่งที่คุณใช้ชำระ และสิ่งที่คุณใช้อ่านราคา
ส่งจากกระเป๋าเงินของคุณเมื่อชำระเงิน
แสดงผลเท่านั้น — แคตตาล็อกสินค้าตั้งราคาเป็นดอลลาร์สหรัฐ
ไม่พบสกุลเงินที่ตรงกัน
เลือกภาษาที่ต้องการให้เว็บไซต์แสดงผล
ไม่พบภาษาที่ตรงกัน
ยังไม่เคยใช้งานใช่ไหม
มีบัญชีอยู่แล้วใช่ไหม
ไม่มีการรีเซ็ตแบบอัตโนมัติ ร้านนี้ไม่ส่งอีเมลใด ๆ จึงไม่มีลิงก์ใช้ครั้งเดียวให้ขอ ปล่อยที่อยู่อีเมลนี้ไว้ในบัญชี แล้วเจ้าหน้าที่จะดำเนินการให้ด้วยตนเอง
รับคำขอแล้ว
ไม่มีอะไรถูกส่งไปยังกล่องจดหมายของคุณ — ร้านนี้ไม่ส่งอีเมลใด ๆ เลย มีคนดำเนินการเรื่องนี้ให้ด้วยมือ
นึกออกแล้วใช่ไหม