เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน

สินค้าที่ติดตาม เข้าสู่ระบบ

Systor

Systor SYSUSB30100-199 USB 3.0/3.1 Duplicator 1 to 199 targets 100MB/s

SKU CH-TZCZ-X0ZS4

Standalone USB duplicator copies up to 199 flash drives at 100 MB/s with synchronous and asynchronous modes plus bit-by-bit verification

  • TypeUSB Flash Drive Duplicator
  • Target1 to 199
  • Buffer Memory256M
  • Supported MediaUSB 1.1, USB 2.0, USB 3.0, USB 3.1
  • Data Transfer Rate100MB/sec
  • Language SupportEnglish or Japanese

Target Size 1 to 199

ดูตัวเลือกเพิ่มอีก 7 แบบ

ตัวเลือกที่ขีดฆ่าไว้มีอยู่จริง แต่ไม่มีจำหน่ายที่นี่

DATA TRANSFER RATE USB 3.0/3.1 - 6GB/min [100MB/sec]

  • Copies up to 199 USB drives simultaneously
  • Standalone operation requires no computer or software
  • Transfers data at up to 100 MB per second
  • Bit-by-bit comparison verifies every copy
  • LCD screen with four-button control shows real-time status

Standalone USB 3.0/3.1 Duplicator

The Systor SYSUSB30100-199 copies up to 199 USB flash drives at once without a host computer. It supports USB 1.1, 2.0, 3.0 and 3.1 media and reaches a transfer rate of 100MB per second. A built-in LCD screen and four-button panel control every operation.

Replaces manual PC-based copying

IT teams and duplication services that currently image drives one by one on a workstation can move to asynchronous multi-channel operation. The jump is worth it when daily volume exceeds what a single USB port can finish in a shift. Not suited for users who only duplicate a handful of drives per week.

Sustained asynchronous throughput

Each of the 199 target slots runs on an independent channel so loading, copying and unloading happen in parallel rather than in sequence. The 256M buffer absorbs burst traffic while bit-by-bit comparison verifies every sector. Quick-copy mode skips empty space on FAT16, FAT32, NTFS and Linux EXT2/3/4 volumes.

จุดเด่น

  • Copies up to 199 USB drives simultaneously
  • Standalone operation requires no computer or software
  • Transfers data at up to 100 MB per second
  • Bit-by-bit comparison verifies every copy
  • LCD screen with four-button control shows real-time status

ข้อมูลจำเพาะ

BrandSystor
ModelSYSUSB30100-199
TypeUSB Flash Drive Duplicator
Target1 to 199
Buffer Memory256M
Supported MediaUSB 1.1, USB 2.0, USB 3.0, USB 3.1
Data Transfer Rate100MB/sec
Language SupportEnglish or Japanese
DisplayLCD Screen
Operating TypeStandalone
Panel ColorBlack
Load TypeSlot
FeaturesQuick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats
Environmental SpecOperating Humidity: 15% ~ 90%
Power Supply115V / 230V

รุ่นอื่นในตระกูลเดียวกัน

อีก 5 รุ่นในตระกูลเดียวกัน

ตระกูลเดียวกัน แต่หน่วยความจำ คูลเลอร์ หรือสัญญาณนาฬิกาต่างกัน — เปรียบเทียบก่อนตัดสินใจ

คำถามเกี่ยวกับสินค้านี้

How many USB target slots does the SYSUSB30100-199 provide for simultaneous duplication?

The unit supports 1 to 199 target ports, allowing up to 199 flash drives to be copied at once in standalone operation.

Does the duplicator need a PC connection or software to start a copy job?

No, it operates completely standalone; you select source and target drives using the 4-key LCD menu and press start without any computer or software.

What erase function is built in for retiring USB drives, and what standard does it meet?

A full erase mode is included that conforms to DoD data-security standards, and the LCD shows real-time progress for each target slot.

อื่น ๆ ในหมวดนี้

ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้

หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที