暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black standalone USB duplicator unit with LCD screen and multiple front slots

Systor

Systor SYSUSB30100-199 USB 3.0/3.1 Duplicator 1 to 199 targets 100MB/s

SKU CH-TZCZ-X0ZS4

Standalone USB duplicator copies up to 199 flash drives at 100 MB/s with synchronous and asynchronous modes plus bit-by-bit verification

  • TypeUSB Flash Drive Duplicator
  • Target1 to 199
  • Buffer Memory256M
  • Supported MediaUSB 1.1, USB 2.0, USB 3.0, USB 3.1
  • Data Transfer Rate100MB/sec
  • Language SupportEnglish or Japanese

Target Size 1 to 199

他に 7点の構成を表示

取り消し線の付いたバージョンは存在しますが、こちらでは取り扱っていません。

DATA TRANSFER RATE USB 3.0/3.1 - 6GB/min [100MB/sec]

  • Copies up to 199 USB drives simultaneously
  • Standalone operation requires no computer or software
  • Transfers data at up to 100 MB per second
  • Bit-by-bit comparison verifies every copy
  • LCD screen with four-button control shows real-time status

Standalone USB 3.0/3.1 Duplicator

The Systor SYSUSB30100-199 copies up to 199 USB flash drives at once without a host computer. It supports USB 1.1, 2.0, 3.0 and 3.1 media and reaches a transfer rate of 100MB per second. A built-in LCD screen and four-button panel control every operation.

Replaces manual PC-based copying

IT teams and duplication services that currently image drives one by one on a workstation can move to asynchronous multi-channel operation. The jump is worth it when daily volume exceeds what a single USB port can finish in a shift. Not suited for users who only duplicate a handful of drives per week.

Sustained asynchronous throughput

Each of the 199 target slots runs on an independent channel so loading, copying and unloading happen in parallel rather than in sequence. The 256M buffer absorbs burst traffic while bit-by-bit comparison verifies every sector. Quick-copy mode skips empty space on FAT16, FAT32, NTFS and Linux EXT2/3/4 volumes.

特長

  • Copies up to 199 USB drives simultaneously
  • Standalone operation requires no computer or software
  • Transfers data at up to 100 MB per second
  • Bit-by-bit comparison verifies every copy
  • LCD screen with four-button control shows real-time status

仕様

BrandSystor
ModelSYSUSB30100-199
TypeUSB Flash Drive Duplicator
Target1 to 199
Buffer Memory256M
Supported MediaUSB 1.1, USB 2.0, USB 3.0, USB 3.1
Data Transfer Rate100MB/sec
Language SupportEnglish or Japanese
DisplayLCD Screen
Operating TypeStandalone
Panel ColorBlack
Load TypeSlot
FeaturesQuick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats
Environmental SpecOperating Humidity: 15% ~ 90%
Power Supply115V / 230V

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How many USB target slots does the SYSUSB30100-199 provide for simultaneous duplication?

The unit supports 1 to 199 target ports, allowing up to 199 flash drives to be copied at once in standalone operation.

Does the duplicator need a PC connection or software to start a copy job?

No, it operates completely standalone; you select source and target drives using the 4-key LCD menu and press start without any computer or software.

What erase function is built in for retiring USB drives, and what standard does it meet?

A full erase mode is included that conforms to DoD data-security standards, and the LCD shows real-time progress for each target slot.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。