暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Rectangular beige unit with four M.2 slots and SATA ports on top

Systor

Systor SYSNVME-YL03PRO04 1-to-4 NVMe/SATA Duplicator 18GB/min

SKU CH-6937-WHQBD

Standalone duplicator copies one NVMe or SATA source to four targets at up to 18 GB/min with downloadable event logs

  • TypeHard Drive Duplicator
  • Target1 to 4
  • Data Transfer Rate300MB/s
  • Operating TypeStandalone
  • Dimensions (H x W x D)11 x 8.25 x 6

TARGET SIZE 1 to 04

DATA TRANSFER RATE 18.0GB/min [300MB/sec] HDD RACK

  • Standalone operation requires no host computer
  • Copies up to 18 GB per minute across four targets
  • Supports NVMe and SATA M.2 plus 2.5 and 3.5 inch SATA drives
  • Handles 2230, 2242, 2260 and 2280 M.2 form factors
  • Downloadable event log records job results and drive details

Standalone 1-to-4 NVMe/SATA duplicator

This duplicator copies or erases up to four target drives at once without a host computer. It accepts NVMe and SATA M.2 modules in 2230, 2242, 2260 and 2280 sizes, plus 2.5 and 3.5 inch SATA SSDs or HDDs. Transfer rates reach 300 MB/s with a quoted throughput of 18 GB per minute. The unit measures 11 x 8.25 x 6 inches and operates completely standalone.

Cross-interface copy and sanitise functions

A single button starts duplication across different interfaces, so an NVMe source can be cloned to SATA targets and vice versa. The copier handles proprietary or unknown partition layouts as well as Windows, Linux and Mac file systems. Multiple erase modes sanitise drives to recognised standards, and a downloadable event log records configuration, source details, target drive identifiers, timestamps and job results for audit trails.

Check drive form factors

Verify that every source and target drive matches the supported M.2 key types and physical lengths listed above. Ensure 2.5 and 3.5 inch SATA drives have the correct power and data connections for the duplicator bays. The unit requires a suitable power outlet and bench space for its 11 x 8.25 x 6 inch footprint. Buyers needing more than four simultaneous targets or non-SATA interfaces should look elsewhere.

特長

  • Standalone operation requires no host computer
  • Copies up to 18 GB per minute across four targets
  • Supports NVMe and SATA M.2 plus 2.5 and 3.5 inch SATA drives
  • Handles 2230, 2242, 2260 and 2280 M.2 form factors
  • Downloadable event log records job results and drive details

仕様

BrandSystor
ModelSYSNVME-YL03PRO04
Part NumberSYSNVME-YL03PRO04
TypeHard Drive Duplicator
Target1 to 4
Data Transfer Rate300MB/s
Operating TypeStandalone
Dimensions (H x W x D)11 x 8.25 x 6

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What maintenance or replacement will the Systor SYSNVME-YL03PRO04 duplicator need later?

The unit has no user-serviceable parts listed; only the source and target drives are swapped during operation.

What limit appears first when the duplicator runs sustained copy jobs across four targets?

The 300 MB/s transfer rate caps total throughput, so aggregate speed cannot exceed that figure.

How much noise, heat or power does the duplicator produce when running all day?

The 11 x 8.25 x 6 inch standalone chassis uses passive cooling with no fan, so it runs silently and generates minimal heat.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。