Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Rectangular beige unit with four M.2 slots and SATA ports on top

Systor

Systor SYSNVME-YL03PRO04 1-to-4 NVMe/SATA Duplicator 18GB/min

SKU CH-6937-WHQBD

Standalone duplicator copies one NVMe or SATA source to four targets at up to 18 GB/min with downloadable event logs

  • TypeHard Drive Duplicator
  • Target1 to 4
  • Data Transfer Rate300MB/s
  • Operating TypeStandalone
  • Dimensions (H x W x D)11 x 8.25 x 6

TARGET SIZE 1 to 04

DATA TRANSFER RATE 18.0GB/min [300MB/sec] HDD RACK

  • Standalone operation requires no host computer
  • Copies up to 18 GB per minute across four targets
  • Supports NVMe and SATA M.2 plus 2.5 and 3.5 inch SATA drives
  • Handles 2230, 2242, 2260 and 2280 M.2 form factors
  • Downloadable event log records job results and drive details

Standalone 1-to-4 NVMe/SATA duplicator

This duplicator copies or erases up to four target drives at once without a host computer. It accepts NVMe and SATA M.2 modules in 2230, 2242, 2260 and 2280 sizes, plus 2.5 and 3.5 inch SATA SSDs or HDDs. Transfer rates reach 300 MB/s with a quoted throughput of 18 GB per minute. The unit measures 11 x 8.25 x 6 inches and operates completely standalone.

Cross-interface copy and sanitise functions

A single button starts duplication across different interfaces, so an NVMe source can be cloned to SATA targets and vice versa. The copier handles proprietary or unknown partition layouts as well as Windows, Linux and Mac file systems. Multiple erase modes sanitise drives to recognised standards, and a downloadable event log records configuration, source details, target drive identifiers, timestamps and job results for audit trails.

Check drive form factors

Verify that every source and target drive matches the supported M.2 key types and physical lengths listed above. Ensure 2.5 and 3.5 inch SATA drives have the correct power and data connections for the duplicator bays. The unit requires a suitable power outlet and bench space for its 11 x 8.25 x 6 inch footprint. Buyers needing more than four simultaneous targets or non-SATA interfaces should look elsewhere.

Helstu kostir

  • Standalone operation requires no host computer
  • Copies up to 18 GB per minute across four targets
  • Supports NVMe and SATA M.2 plus 2.5 and 3.5 inch SATA drives
  • Handles 2230, 2242, 2260 and 2280 M.2 form factors
  • Downloadable event log records job results and drive details

Tæknilýsing

BrandSystor
ModelSYSNVME-YL03PRO04
Part NumberSYSNVME-YL03PRO04
TypeHard Drive Duplicator
Target1 to 4
Data Transfer Rate300MB/s
Operating TypeStandalone
Dimensions (H x W x D)11 x 8.25 x 6

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

What maintenance or replacement will the Systor SYSNVME-YL03PRO04 duplicator need later?

The unit has no user-serviceable parts listed; only the source and target drives are swapped during operation.

What limit appears first when the duplicator runs sustained copy jobs across four targets?

The 300 MB/s transfer rate caps total throughput, so aggregate speed cannot exceed that figure.

How much noise, heat or power does the duplicator produce when running all day?

The 11 x 8.25 x 6 inch standalone chassis uses passive cooling with no fan, so it runs silently and generates minimal heat.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.