Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Rectangular beige unit with four M.2 slots and SATA ports on top

Systor

Systor SYSNVME-YL03PRO04 1-to-4 NVMe/SATA Duplicator 18GB/min

SKU CH-6937-WHQBD

Standalone duplicator copies one NVMe or SATA source to four targets at up to 18 GB/min with downloadable event logs

  • TypeHard Drive Duplicator
  • Target1 to 4
  • Data Transfer Rate300MB/s
  • Operating TypeStandalone
  • Dimensions (H x W x D)11 x 8.25 x 6

TARGET SIZE 1 to 04

DATA TRANSFER RATE 18.0GB/min [300MB/sec] HDD RACK

  • Standalone operation requires no host computer
  • Copies up to 18 GB per minute across four targets
  • Supports NVMe and SATA M.2 plus 2.5 and 3.5 inch SATA drives
  • Handles 2230, 2242, 2260 and 2280 M.2 form factors
  • Downloadable event log records job results and drive details

Standalone 1-to-4 NVMe/SATA duplicator

This duplicator copies or erases up to four target drives at once without a host computer. It accepts NVMe and SATA M.2 modules in 2230, 2242, 2260 and 2280 sizes, plus 2.5 and 3.5 inch SATA SSDs or HDDs. Transfer rates reach 300 MB/s with a quoted throughput of 18 GB per minute. The unit measures 11 x 8.25 x 6 inches and operates completely standalone.

Cross-interface copy and sanitise functions

A single button starts duplication across different interfaces, so an NVMe source can be cloned to SATA targets and vice versa. The copier handles proprietary or unknown partition layouts as well as Windows, Linux and Mac file systems. Multiple erase modes sanitise drives to recognised standards, and a downloadable event log records configuration, source details, target drive identifiers, timestamps and job results for audit trails.

Check drive form factors

Verify that every source and target drive matches the supported M.2 key types and physical lengths listed above. Ensure 2.5 and 3.5 inch SATA drives have the correct power and data connections for the duplicator bays. The unit requires a suitable power outlet and bench space for its 11 x 8.25 x 6 inch footprint. Buyers needing more than four simultaneous targets or non-SATA interfaces should look elsewhere.

Kohokohdat

  • Standalone operation requires no host computer
  • Copies up to 18 GB per minute across four targets
  • Supports NVMe and SATA M.2 plus 2.5 and 3.5 inch SATA drives
  • Handles 2230, 2242, 2260 and 2280 M.2 form factors
  • Downloadable event log records job results and drive details

Tekniset tiedot

BrandSystor
ModelSYSNVME-YL03PRO04
Part NumberSYSNVME-YL03PRO04
TypeHard Drive Duplicator
Target1 to 4
Data Transfer Rate300MB/s
Operating TypeStandalone
Dimensions (H x W x D)11 x 8.25 x 6

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

What maintenance or replacement will the Systor SYSNVME-YL03PRO04 duplicator need later?

The unit has no user-serviceable parts listed; only the source and target drives are swapped during operation.

What limit appears first when the duplicator runs sustained copy jobs across four targets?

The 300 MB/s transfer rate caps total throughput, so aggregate speed cannot exceed that figure.

How much noise, heat or power does the duplicator produce when running all day?

The 11 x 8.25 x 6 inch standalone chassis uses passive cooling with no fan, so it runs silently and generates minimal heat.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.