Systor SYSNVME-YL03REG04 1-to-4 NVMe/SATA Duplicator 18GB/min
- Hard Drive Duplicat…
- 1 to 4
Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.
Systor
Standalone duplicator copies one NVMe or SATA source to four targets at up to 18 GB/min with downloadable event logs
TARGET SIZE 1 to 04
DATA TRANSFER RATE 18.0GB/min [300MB/sec] HDD RACK
This duplicator copies or erases up to four target drives at once without a host computer. It accepts NVMe and SATA M.2 modules in 2230, 2242, 2260 and 2280 sizes, plus 2.5 and 3.5 inch SATA SSDs or HDDs. Transfer rates reach 300 MB/s with a quoted throughput of 18 GB per minute. The unit measures 11 x 8.25 x 6 inches and operates completely standalone.
A single button starts duplication across different interfaces, so an NVMe source can be cloned to SATA targets and vice versa. The copier handles proprietary or unknown partition layouts as well as Windows, Linux and Mac file systems. Multiple erase modes sanitise drives to recognised standards, and a downloadable event log records configuration, source details, target drive identifiers, timestamps and job results for audit trails.
Verify that every source and target drive matches the supported M.2 key types and physical lengths listed above. Ensure 2.5 and 3.5 inch SATA drives have the correct power and data connections for the duplicator bays. The unit requires a suitable power outlet and bench space for its 11 x 8.25 x 6 inch footprint. Buyers needing more than four simultaneous targets or non-SATA interfaces should look elsewhere.
| Brand | Systor |
|---|---|
| Model | SYSNVME-YL03PRO04 |
| Part Number | SYSNVME-YL03PRO04 |
| Type | Hard Drive Duplicator |
| Target | 1 to 4 |
| Data Transfer Rate | 300MB/s |
| Operating Type | Standalone |
| Dimensions (H x W x D) | 11 x 8.25 x 6 |
Alte versiuni ale acestui model
Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.
The unit has no user-serviceable parts listed; only the source and target drives are swapped during operation.
The 300 MB/s transfer rate caps total throughput, so aggregate speed cannot exceed that figure.
The 11 x 8.25 x 6 inch standalone chassis uses passive cooling with no fan, so it runs silently and generates minimal heat.
Tot din acest raion
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
În ce monedă plătiți și în ce monedă citiți prețurile.
Trimis din portofelul dumneavoastră la finalizarea comenzii
Doar pentru afișare — catalogul este exprimat în dolari
Nicio monedă nu corespunde.
Alegeți limba în care vă vorbește site-ul.
Nicio limbă nu corespunde.
Prima vizită?
Aveți deja un cont?
Nu există o resetare automată: acest magazin nu trimite niciun e-mail, deci nu există niciun link de unică folosință de solicitat. Lăsați adresa în cont. Va fi tratată manual.
Cerere înregistrată
Nu veți primi nimic în căsuța de e-mail — acest magazin nu trimite niciun e-mail. Cineva se ocupă de asta manual.
V-ați amintit-o?