暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Compact standalone duplicator unit with four M.2 NVMe/SATA slots on top, matte black finish, 11 by 8.25 by 6 inches

Systor

Systor SYSNVME-YL03REG04 1-to-4 NVMe/SATA Duplicator 18GB/min

SKU CH-VD10-5S35A

Standalone duplicator copies one M.2 NVMe or SATA drive to four targets at up to 18 GB per minute

  • TypeHard Drive Duplicator
  • Target1 to 4
  • Data Transfer Rate300MB/s
  • Operating TypeStandalone
  • Dimensions (H x W x D)11 x 8.25 x 6

TARGET SIZE 1 to 04

DATA TRANSFER RATE 18.0GB/min [300MB/sec] NO HDD RACK

  • Standalone operation with no computer or software required
  • Copies up to 4 target drives simultaneously from one source
  • Transfer speeds reaching 18 GB per minute for fast duplication
  • Supports M.2 NVMe and SATA drives in 2230, 2242, 2260, 2280 sizes
  • Downloadable event logs capture job results and drive details

Standalone M.2 NVMe/SATA Duplicator

This standalone duplicator clones or sanitises up to four M.2 drives simultaneously without a host computer. It accepts NVMe and SATA M.2 modules in 2230, 2242, 2260 and 2280 form factors, plus 2.5-inch and 3.5-inch SATA drives via optional adapters. The unit handles Windows, Linux and Mac filesystems as well as proprietary or unknown formats.

Sustained 18 GB/min Copy Across Four Targets

The copier maintains a transfer rate up to 18 GB per minute (300 MB/s) even when all four target ports are populated, avoiding the slowdown common on lesser devices. Each session produces a downloadable event log recording configuration settings, source and target drive details, timestamps and job results for audit trails. Erase modes include source-port wiping to increase concurrent sanitisation slots.

Replaces Manual PC-Based Cloning

Organisations currently copying drives one by one on a workstation gain a dedicated appliance that scales to four targets and supports daisy-chaining multiple units for higher volume. The jump is worthwhile when repeatable, logged duplication or sanitisation of M.2 media is a daily operational requirement rather than an occasional task.

特長

  • Standalone operation with no computer or software required
  • Copies up to 4 target drives simultaneously from one source
  • Transfer speeds reaching 18 GB per minute for fast duplication
  • Supports M.2 NVMe and SATA drives in 2230, 2242, 2260, 2280 sizes
  • Downloadable event logs capture job results and drive details

仕様

BrandSystor
ModelSYSNVME-YL03REG04
Part NumberSYSNVME-YL03REG04
TypeHard Drive Duplicator
Target1 to 4
Data Transfer Rate300MB/s
Operating TypeStandalone
Dimensions (H x W x D)11 x 8.25 x 6

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Does the duplicator generate noticeable heat or noise when running all day at 18GB/min?

The unit operates as a standalone copier with no computer required, so its internal cooling handles sustained copy sessions across up to four target drives.

What drives or adapters must I already own to use the SYSNVME-YL03REG04?

It accepts M.2 modules in 2230, 2242, 2260 and 2280 sizes with B, M or B+M keys; 2.5" or 3.5" SATA drives need the optional adapters.

Can I connect this duplicator to an older SATA-only workstation for logging?

The duplicator is completely standalone and does not require a host computer; event logs are downloaded directly from the unit after each job.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。