Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση

Systor

Systor SYSNVME-YL03REG04 1-to-4 NVMe/SATA Duplicator 18GB/min

SKU CH-VD10-5S35A

Standalone duplicator copies one M.2 NVMe or SATA drive to four targets at up to 18 GB per minute

  • TypeHard Drive Duplicator
  • Target1 to 4
  • Data Transfer Rate300MB/s
  • Operating TypeStandalone
  • Dimensions (H x W x D)11 x 8.25 x 6

TARGET SIZE 1 to 04

DATA TRANSFER RATE 18.0GB/min [300MB/sec] NO HDD RACK

  • Standalone operation with no computer or software required
  • Copies up to 4 target drives simultaneously from one source
  • Transfer speeds reaching 18 GB per minute for fast duplication
  • Supports M.2 NVMe and SATA drives in 2230, 2242, 2260, 2280 sizes
  • Downloadable event logs capture job results and drive details

Standalone M.2 NVMe/SATA Duplicator

This standalone duplicator clones or sanitises up to four M.2 drives simultaneously without a host computer. It accepts NVMe and SATA M.2 modules in 2230, 2242, 2260 and 2280 form factors, plus 2.5-inch and 3.5-inch SATA drives via optional adapters. The unit handles Windows, Linux and Mac filesystems as well as proprietary or unknown formats.

Sustained 18 GB/min Copy Across Four Targets

The copier maintains a transfer rate up to 18 GB per minute (300 MB/s) even when all four target ports are populated, avoiding the slowdown common on lesser devices. Each session produces a downloadable event log recording configuration settings, source and target drive details, timestamps and job results for audit trails. Erase modes include source-port wiping to increase concurrent sanitisation slots.

Replaces Manual PC-Based Cloning

Organisations currently copying drives one by one on a workstation gain a dedicated appliance that scales to four targets and supports daisy-chaining multiple units for higher volume. The jump is worthwhile when repeatable, logged duplication or sanitisation of M.2 media is a daily operational requirement rather than an occasional task.

Βασικά χαρακτηριστικά

  • Standalone operation with no computer or software required
  • Copies up to 4 target drives simultaneously from one source
  • Transfer speeds reaching 18 GB per minute for fast duplication
  • Supports M.2 NVMe and SATA drives in 2230, 2242, 2260, 2280 sizes
  • Downloadable event logs capture job results and drive details

Προδιαγραφές

BrandSystor
ModelSYSNVME-YL03REG04
Part NumberSYSNVME-YL03REG04
TypeHard Drive Duplicator
Target1 to 4
Data Transfer Rate300MB/s
Operating TypeStandalone
Dimensions (H x W x D)11 x 8.25 x 6

Άλλες εκδόσεις αυτού του μοντέλου

5 ακόμη στην ίδια σειρά

Ίδια οικογένεια, διαφορετική μνήμη, ψύκτρα ή συχνότητα — συγκρίνετε πριν αποφασίσετε.

Ερωτήσεις για αυτό το προϊόν

Does the duplicator generate noticeable heat or noise when running all day at 18GB/min?

The unit operates as a standalone copier with no computer required, so its internal cooling handles sustained copy sessions across up to four target drives.

What drives or adapters must I already own to use the SYSNVME-YL03REG04?

It accepts M.2 modules in 2230, 2242, 2260 and 2280 sizes with B, M or B+M keys; 2.5" or 3.5" SATA drives need the optional adapters.

Can I connect this duplicator to an older SATA-only workstation for logging?

The duplicator is completely standalone and does not require a host computer; event logs are downloaded directly from the unit after each job.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.