Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Compact standalone duplicator unit with four M.2 NVMe/SATA slots on top, matte black finish, 11 by 8.25 by 6 inches

Systor

Systor SYSNVME-YL03REG04 1-to-4 NVMe/SATA Duplicator 18GB/min

SKU CH-VD10-5S35A

Standalone duplicator copies one M.2 NVMe or SATA drive to four targets at up to 18 GB per minute

  • TypeHard Drive Duplicator
  • Target1 to 4
  • Data Transfer Rate300MB/s
  • Operating TypeStandalone
  • Dimensions (H x W x D)11 x 8.25 x 6

TARGET SIZE 1 to 04

DATA TRANSFER RATE 18.0GB/min [300MB/sec] NO HDD RACK

  • Standalone operation with no computer or software required
  • Copies up to 4 target drives simultaneously from one source
  • Transfer speeds reaching 18 GB per minute for fast duplication
  • Supports M.2 NVMe and SATA drives in 2230, 2242, 2260, 2280 sizes
  • Downloadable event logs capture job results and drive details

Standalone M.2 NVMe/SATA Duplicator

This standalone duplicator clones or sanitises up to four M.2 drives simultaneously without a host computer. It accepts NVMe and SATA M.2 modules in 2230, 2242, 2260 and 2280 form factors, plus 2.5-inch and 3.5-inch SATA drives via optional adapters. The unit handles Windows, Linux and Mac filesystems as well as proprietary or unknown formats.

Sustained 18 GB/min Copy Across Four Targets

The copier maintains a transfer rate up to 18 GB per minute (300 MB/s) even when all four target ports are populated, avoiding the slowdown common on lesser devices. Each session produces a downloadable event log recording configuration settings, source and target drive details, timestamps and job results for audit trails. Erase modes include source-port wiping to increase concurrent sanitisation slots.

Replaces Manual PC-Based Cloning

Organisations currently copying drives one by one on a workstation gain a dedicated appliance that scales to four targets and supports daisy-chaining multiple units for higher volume. The jump is worthwhile when repeatable, logged duplication or sanitisation of M.2 media is a daily operational requirement rather than an occasional task.

Přednosti

  • Standalone operation with no computer or software required
  • Copies up to 4 target drives simultaneously from one source
  • Transfer speeds reaching 18 GB per minute for fast duplication
  • Supports M.2 NVMe and SATA drives in 2230, 2242, 2260, 2280 sizes
  • Downloadable event logs capture job results and drive details

Specifikace

BrandSystor
ModelSYSNVME-YL03REG04
Part NumberSYSNVME-YL03REG04
TypeHard Drive Duplicator
Target1 to 4
Data Transfer Rate300MB/s
Operating TypeStandalone
Dimensions (H x W x D)11 x 8.25 x 6

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

Does the duplicator generate noticeable heat or noise when running all day at 18GB/min?

The unit operates as a standalone copier with no computer required, so its internal cooling handles sustained copy sessions across up to four target drives.

What drives or adapters must I already own to use the SYSNVME-YL03REG04?

It accepts M.2 modules in 2230, 2242, 2260 and 2280 sizes with B, M or B+M keys; 2.5" or 3.5" SATA drives need the optional adapters.

Can I connect this duplicator to an older SATA-only workstation for logging?

The duplicator is completely standalone and does not require a host computer; event logs are downloaded directly from the unit after each job.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.