暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black standalone USB duplicator with 23 slots and LCD screen

Systor

Systor SYSUSB30100-23 USB 3.0/3.1 Duplicator 1 to 23

SKU CH-M38P-0CC73

Standalone USB 3.0/3.1 duplicator copies one source to 23 targets at up to 100MB/sec with LCD control

  • TypeUSB Flash Drive Duplicator
  • Target1 to 23
  • Buffer Memory256M
  • Supported MediaUSB 1.1, USB 2.0, USB 3.0, USB 3.1
  • Data Transfer Rate100MB/sec
  • Language SupportEnglish or Japanese

Target Size 1 to 23

他に 7点の構成を表示

取り消し線の付いたバージョンは存在しますが、こちらでは取り扱っていません。

DATA TRANSFER RATE USB 3.0/3.1 - 6GB/min [100MB/sec]

  • Standalone operation with no computer or software required
  • Copies up to 23 USB drives simultaneously at 100MB/sec
  • Asynchronous copy lets each channel load and unload independently
  • Bit-for-bit hardware compare verifies every duplication for reliability
  • LCD screen with four-key control shows real-time copy status

Standalone USB 3.0/3.1 Duplicator 1-to-23

The Systor SYSUSB30100-23 is a standalone duplicator that copies one source USB flash drive to up to 23 targets simultaneously. It operates without a host computer or software, using an integrated multi-core processor and 256 MB buffer memory. The unit supports USB 1.1, 2.0, 3.0 and 3.1 drives and reaches a transfer rate of 100 MB per second. An LCD screen and four-button control panel manage all operations.

High-volume USB flash duplication

This duplicator suits organisations that need to clone or sanitise large batches of USB flash drives quickly. Asynchronous copy mode lets each channel load, unload and copy independently, so operators can swap targets without pausing other ports. Bit-for-bit comparison and DoD-compliant erase functions provide verification and secure sanitisation. Buyers who need to duplicate internal drives, memory cards or interfaces other than USB should look elsewhere.

23 target ports with 100 MB/s throughput

The single specification that decides fit is the 23-port capacity combined with a maximum transfer rate of 100 MB per second. This determines how many drives can be processed in parallel and the shortest possible cycle time for a given image size. Power input accepts 115 V or 230 V, and operating humidity range is 15 to 90 percent.

特長

  • Standalone operation with no computer or software required
  • Copies up to 23 USB drives simultaneously at 100MB/sec
  • Asynchronous copy lets each channel load and unload independently
  • Bit-for-bit hardware compare verifies every duplication for reliability
  • LCD screen with four-key control shows real-time copy status

仕様

BrandSystor
ModelSYSUSB30100-23
TypeUSB Flash Drive Duplicator
Target1 to 23
Buffer Memory256M
Supported MediaUSB 1.1, USB 2.0, USB 3.0, USB 3.1
Data Transfer Rate100MB/sec
Language SupportEnglish or Japanese
DisplayLCD Screen
Operating TypeStandalone
Panel ColorBlack
Load TypeSlot
FeaturesQuick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats
Environmental SpecOperating Humidity: 15% ~ 90%
Power Supply115V / 230V

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will the duplicator copy drives formatted with older FAT16 or FAT32 file systems?

Yes, the Quick Copy mode supports FAT16 and FAT32 along with NTFS and Linux EXT2/EXT3/EXT4, so legacy drives are copied without reformatting.

How can I verify each copy finished correctly on the 23 target ports?

The built-in bit-for-bit hardware comparison runs after every duplication and the LCD screen shows real-time pass or fail status for every channel.

Does the package include 23 USB flash drives or only the duplicator unit?

The box contains the standalone duplicator with LCD control panel and power supply; USB flash drives are not included and must be purchased separately.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。