저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인

Systor

Systor SYSUSB30100-23 USB 3.0/3.1 Duplicator 1 to 23

SKU CH-M38P-0CC73

Standalone USB 3.0/3.1 duplicator copies one source to 23 targets at up to 100MB/sec with LCD control

  • TypeUSB Flash Drive Duplicator
  • Target1 to 23
  • Buffer Memory256M
  • Supported MediaUSB 1.1, USB 2.0, USB 3.0, USB 3.1
  • Data Transfer Rate100MB/sec
  • Language SupportEnglish or Japanese

취소선으로 표시된 버전은 존재하지만, 이곳에서는 취급하지 않습니다.

DATA TRANSFER RATE USB 3.0/3.1 - 6GB/min [100MB/sec]

  • Standalone operation with no computer or software required
  • Copies up to 23 USB drives simultaneously at 100MB/sec
  • Asynchronous copy lets each channel load and unload independently
  • Bit-for-bit hardware compare verifies every duplication for reliability
  • LCD screen with four-key control shows real-time copy status

Standalone USB 3.0/3.1 Duplicator 1-to-23

The Systor SYSUSB30100-23 is a standalone duplicator that copies one source USB flash drive to up to 23 targets simultaneously. It operates without a host computer or software, using an integrated multi-core processor and 256 MB buffer memory. The unit supports USB 1.1, 2.0, 3.0 and 3.1 drives and reaches a transfer rate of 100 MB per second. An LCD screen and four-button control panel manage all operations.

High-volume USB flash duplication

This duplicator suits organisations that need to clone or sanitise large batches of USB flash drives quickly. Asynchronous copy mode lets each channel load, unload and copy independently, so operators can swap targets without pausing other ports. Bit-for-bit comparison and DoD-compliant erase functions provide verification and secure sanitisation. Buyers who need to duplicate internal drives, memory cards or interfaces other than USB should look elsewhere.

23 target ports with 100 MB/s throughput

The single specification that decides fit is the 23-port capacity combined with a maximum transfer rate of 100 MB per second. This determines how many drives can be processed in parallel and the shortest possible cycle time for a given image size. Power input accepts 115 V or 230 V, and operating humidity range is 15 to 90 percent.

주요 특징

  • Standalone operation with no computer or software required
  • Copies up to 23 USB drives simultaneously at 100MB/sec
  • Asynchronous copy lets each channel load and unload independently
  • Bit-for-bit hardware compare verifies every duplication for reliability
  • LCD screen with four-key control shows real-time copy status

사양

BrandSystor
ModelSYSUSB30100-23
TypeUSB Flash Drive Duplicator
Target1 to 23
Buffer Memory256M
Supported MediaUSB 1.1, USB 2.0, USB 3.0, USB 3.1
Data Transfer Rate100MB/sec
Language SupportEnglish or Japanese
DisplayLCD Screen
Operating TypeStandalone
Panel ColorBlack
Load TypeSlot
FeaturesQuick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats
Environmental SpecOperating Humidity: 15% ~ 90%
Power Supply115V / 230V

이 모델의 다른 버전

같은 라인업에서 5개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

Will the duplicator copy drives formatted with older FAT16 or FAT32 file systems?

Yes, the Quick Copy mode supports FAT16 and FAT32 along with NTFS and Linux EXT2/EXT3/EXT4, so legacy drives are copied without reformatting.

How can I verify each copy finished correctly on the 23 target ports?

The built-in bit-for-bit hardware comparison runs after every duplication and the LCD screen shows real-time pass or fail status for every channel.

Does the package include 23 USB flash drives or only the duplicator unit?

The box contains the standalone duplicator with LCD control panel and power supply; USB flash drives are not included and must be purchased separately.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.