Systor SYS-USBD-39 USB Duplicator 1 to 39 targets 33MB/s
- USB Flash Drive Dup…
- 1 to 39
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Systor
Standalone USB 3.0/3.1 duplicator copies one source to 23 targets at up to 100MB/sec with LCD control
Target Size 1 to 23
Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.
DATA TRANSFER RATE USB 3.0/3.1 - 6GB/min [100MB/sec]
The Systor SYSUSB30100-23 is a standalone duplicator that copies one source USB flash drive to up to 23 targets simultaneously. It operates without a host computer or software, using an integrated multi-core processor and 256 MB buffer memory. The unit supports USB 1.1, 2.0, 3.0 and 3.1 drives and reaches a transfer rate of 100 MB per second. An LCD screen and four-button control panel manage all operations.
This duplicator suits organisations that need to clone or sanitise large batches of USB flash drives quickly. Asynchronous copy mode lets each channel load, unload and copy independently, so operators can swap targets without pausing other ports. Bit-for-bit comparison and DoD-compliant erase functions provide verification and secure sanitisation. Buyers who need to duplicate internal drives, memory cards or interfaces other than USB should look elsewhere.
The single specification that decides fit is the 23-port capacity combined with a maximum transfer rate of 100 MB per second. This determines how many drives can be processed in parallel and the shortest possible cycle time for a given image size. Power input accepts 115 V or 230 V, and operating humidity range is 15 to 90 percent.
| Brand | Systor |
|---|---|
| Model | SYSUSB30100-23 |
| Type | USB Flash Drive Duplicator |
| Target | 1 to 23 |
| Buffer Memory | 256M |
| Supported Media | USB 1.1, USB 2.0, USB 3.0, USB 3.1 |
| Data Transfer Rate | 100MB/sec |
| Language Support | English or Japanese |
| Display | LCD Screen |
| Operating Type | Standalone |
| Panel Color | Black |
| Load Type | Slot |
| Features | Quick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats |
| Environmental Spec | Operating Humidity: 15% ~ 90% |
| Power Supply | 115V / 230V |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
Yes, the Quick Copy mode supports FAT16 and FAT32 along with NTFS and Linux EXT2/EXT3/EXT4, so legacy drives are copied without reformatting.
The built-in bit-for-bit hardware comparison runs after every duplication and the LCD screen shows real-time pass or fail status for every channel.
The box contains the standalone duplicator with LCD control panel and power supply; USB flash drives are not included and must be purchased separately.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?