Systor SYS31EXH 1-to-31 USB Duplicator & Sanitizer
- Duplicator: USB fla…
- 1 to 31
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Systor
Standalone USB duplicator copies one source to seven targets at up to 300 MB/s with bit-by-bit verification
Target Size 1 to 07
Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.
DATA TRANSFER RATE USB 3.0/3.1 - 18GB/min [300MB/sec]
The Systor SYS-USB30-7 is a standalone duplicator that copies one source USB drive to up to seven target drives simultaneously. It operates without a host computer and supports USB 1.1, 2.0, 3.0 and 3.1 flash media through its slot-loading ports. A built-in LCD screen and four-button interface provide status feedback in English or Japanese.
This unit suits IT departments, duplication services and manufacturers who need to clone or securely erase batches of USB flash drives at speeds up to 300 MB/s. It is not suited for users who require memory-card slots, internal drive bays or network-connected management. Buyers needing to duplicate optical discs or hard drives should look at dedicated duplicators for those media types.
Each of the seven target ports operates independently, allowing asynchronous load, copy and unload cycles without waiting for other slots to finish. The 256 MB buffer sustains the maximum 300 MB/s transfer rate during bit-for-bit duplication and verify operations across FAT16, FAT32, NTFS and Linux file systems.
| Brand | Systor |
|---|---|
| Model | SYS-USB30-7 |
| Type | USB Duplicator |
| Target | 1 to 7 |
| Buffer Memory | 256M |
| Supported Media | USB 1.1, USB 2.0, USB 3.0, USB 3.1 |
| Data Transfer Rate | 300MB/s |
| Language Support | English or Japanese |
| Display | LCD Screen |
| Operating Type | Standalone |
| Panel Color | Black |
| Load Type | Slot |
| Features | Quick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats |
| Environmental Spec | Operating Humidity: 15% ~ 90% |
| Power Supply | 115V / 230V |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
The 300 MB/s figure is the peak interface speed; actual throughput per port will be lower when all seven targets copy simultaneously because the total bandwidth is shared across channels.
It supports USB 1.1, 2.0, 3.0 and 3.1; USB 3.1 Gen 1 caps the theoretical maximum at 5 Gbps, so real-world copy speeds cannot exceed that limit.
The unit has seven front-loading slots for USB drives, a black front panel with an LCD, and an internal power supply that accepts 115 V or 230 V mains.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?