Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.

Artículos guardados Iniciar sesión
Black standalone USB duplicator with LCD screen and seven target slots

Systor

Systor SYS-USB30-7 1 to 7 USB 3.0/3.1 Duplicator

SKU CH-MFD0-YJM86

Standalone USB duplicator copies one source to seven targets at up to 300 MB/s with bit-by-bit verification

  • TypeUSB Duplicator
  • Target1 to 7
  • Buffer Memory256M
  • Supported MediaUSB 1.1, USB 2.0, USB 3.0, USB 3.1
  • Data Transfer Rate300MB/s
  • Language SupportEnglish or Japanese

Target Size 1 to 07

Ver 7 configuraciones más

Las versiones tachadas existen, pero no están disponibles aquí.

DATA TRANSFER RATE USB 3.0/3.1 - 18GB/min [300MB/sec]

  • Standalone operation requires no host computer
  • Copies up to seven USB drives simultaneously
  • Asynchronous mode lets each channel load and copy independently
  • Bit-by-bit compare verifies every duplication
  • LCD with four-key control simplifies job setup

Systor SYS-USB30-7 USB Duplicator

The Systor SYS-USB30-7 is a standalone duplicator that copies one source USB drive to up to seven target drives simultaneously. It operates without a host computer and supports USB 1.1, 2.0, 3.0 and 3.1 flash media through its slot-loading ports. A built-in LCD screen and four-button interface provide status feedback in English or Japanese.

Ideal for high-volume USB duplication

This unit suits IT departments, duplication services and manufacturers who need to clone or securely erase batches of USB flash drives at speeds up to 300 MB/s. It is not suited for users who require memory-card slots, internal drive bays or network-connected management. Buyers needing to duplicate optical discs or hard drives should look at dedicated duplicators for those media types.

300 MB/s asynchronous copy with 256 MB buffer

Each of the seven target ports operates independently, allowing asynchronous load, copy and unload cycles without waiting for other slots to finish. The 256 MB buffer sustains the maximum 300 MB/s transfer rate during bit-for-bit duplication and verify operations across FAT16, FAT32, NTFS and Linux file systems.

Puntos fuertes

  • Standalone operation requires no host computer
  • Copies up to seven USB drives simultaneously
  • Asynchronous mode lets each channel load and copy independently
  • Bit-by-bit compare verifies every duplication
  • LCD with four-key control simplifies job setup

Especificaciones

BrandSystor
ModelSYS-USB30-7
TypeUSB Duplicator
Target1 to 7
Buffer Memory256M
Supported MediaUSB 1.1, USB 2.0, USB 3.0, USB 3.1
Data Transfer Rate300MB/s
Language SupportEnglish or Japanese
DisplayLCD Screen
Operating TypeStandalone
Panel ColorBlack
Load TypeSlot
FeaturesQuick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats
Environmental SpecOperating Humidity: 15% ~ 90%
Power Supply115V / 230V

Otras versiones de este modelo

5 más en esta gama

Misma familia, con memoria, disipador o frecuencia diferentes — compare antes de decidirse.

Preguntas sobre este artículo

What does the 300 MB/s transfer rate mean when the duplicator is running all seven targets?

The 300 MB/s figure is the peak interface speed; actual throughput per port will be lower when all seven targets copy simultaneously because the total bandwidth is shared across channels.

Which USB standards does the duplicator support and what speed ceiling does USB 3.1 impose?

It supports USB 1.1, 2.0, 3.0 and 3.1; USB 3.1 Gen 1 caps the theoretical maximum at 5 Gbps, so real-world copy speeds cannot exceed that limit.

What physical space and power connections does the SYS-USB30-7 need to operate?

The unit has seven front-loading slots for USB drives, a black front panel with an LCD, and an internal power supply that accepts 115 V or 230 V mains.

También en este pasillo

Los clientes también compararon

Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.