我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Black standalone USB duplicator with LCD screen and seven target slots

Systor

Systor SYS-USB30-7 1 to 7 USB 3.0/3.1 Duplicator

SKU CH-MFD0-YJM86

Standalone USB duplicator copies one source to seven targets at up to 300 MB/s with bit-by-bit verification

  • TypeUSB Duplicator
  • Target1 to 7
  • Buffer Memory256M
  • Supported MediaUSB 1.1, USB 2.0, USB 3.0, USB 3.1
  • Data Transfer Rate300MB/s
  • Language SupportEnglish or Japanese

Target Size 1 to 07

顯示另外 7 款選項

被劃上刪除線的選項確實存在，但本站並無供貨。

DATA TRANSFER RATE USB 3.0/3.1 - 18GB/min [300MB/sec]

  • Standalone operation requires no host computer
  • Copies up to seven USB drives simultaneously
  • Asynchronous mode lets each channel load and copy independently
  • Bit-by-bit compare verifies every duplication
  • LCD with four-key control simplifies job setup

Systor SYS-USB30-7 USB Duplicator

The Systor SYS-USB30-7 is a standalone duplicator that copies one source USB drive to up to seven target drives simultaneously. It operates without a host computer and supports USB 1.1, 2.0, 3.0 and 3.1 flash media through its slot-loading ports. A built-in LCD screen and four-button interface provide status feedback in English or Japanese.

Ideal for high-volume USB duplication

This unit suits IT departments, duplication services and manufacturers who need to clone or securely erase batches of USB flash drives at speeds up to 300 MB/s. It is not suited for users who require memory-card slots, internal drive bays or network-connected management. Buyers needing to duplicate optical discs or hard drives should look at dedicated duplicators for those media types.

300 MB/s asynchronous copy with 256 MB buffer

Each of the seven target ports operates independently, allowing asynchronous load, copy and unload cycles without waiting for other slots to finish. The 256 MB buffer sustains the maximum 300 MB/s transfer rate during bit-for-bit duplication and verify operations across FAT16, FAT32, NTFS and Linux file systems.

商品特色

  • Standalone operation requires no host computer
  • Copies up to seven USB drives simultaneously
  • Asynchronous mode lets each channel load and copy independently
  • Bit-by-bit compare verifies every duplication
  • LCD with four-key control simplifies job setup

商品規格

BrandSystor
ModelSYS-USB30-7
TypeUSB Duplicator
Target1 to 7
Buffer Memory256M
Supported MediaUSB 1.1, USB 2.0, USB 3.0, USB 3.1
Data Transfer Rate300MB/s
Language SupportEnglish or Japanese
DisplayLCD Screen
Operating TypeStandalone
Panel ColorBlack
Load TypeSlot
FeaturesQuick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats
Environmental SpecOperating Humidity: 15% ~ 90%
Power Supply115V / 230V

其他版本

同系列還有 5 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

What does the 300 MB/s transfer rate mean when the duplicator is running all seven targets?

The 300 MB/s figure is the peak interface speed; actual throughput per port will be lower when all seven targets copy simultaneously because the total bandwidth is shared across channels.

Which USB standards does the duplicator support and what speed ceiling does USB 3.1 impose?

It supports USB 1.1, 2.0, 3.0 and 3.1; USB 3.1 Gen 1 caps the theoretical maximum at 5 Gbps, so real-world copy speeds cannot exceed that limit.

What physical space and power connections does the SYS-USB30-7 need to operate?

The unit has seven front-loading slots for USB drives, a black front panel with an LCD, and an internal power supply that accepts 115 V or 230 V mains.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。