我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Black standalone USB duplicator with LCD screen and 63 slots

Systor

Systor SYS-USB30-63 USB 3.0/3.1 Duplicator 1 to 63

SKU CH-JS90-8ZD0K

Standalone USB flash drive duplicator copies one source to 63 targets at up to 300 MB/s with asynchronous operation and bit-by-bit verification

  • TypeUSB Flash Drive Duplicator
  • Target1 to 63
  • Buffer Memory256M
  • Supported MediaUSB 1.1, USB 2.0, USB 3.0, USB 3.1
  • Data Transfer Rate300MB/s
  • Language SupportEnglish or Japanese

Target Size 1 to 63

顯示另外 7 款選項

被劃上刪除線的選項確實存在，但本站並無供貨。

DATA TRANSFER RATE USB 3.0/3.1 - 18GB/min [300MB/sec]

  • Copy 63 USB drives simultaneously with 1 to 63 target slots
  • Achieve 18 GB per minute throughput at 300 MB per second transfer rate
  • Operate independently with standalone LCD control and no computer needed
  • Duplicate FAT16, FAT32, NTFS and Linux EXT2/3/4 formats via quick copy
  • Verify every bit with bit-by-bit compare for data integrity

High-Capacity USB Duplicator

The Systor SYS-USB30-63 is a standalone duplicator that copies one source USB drive to as many as sixty-three targets simultaneously. It supports USB 1.1, 2.0, 3.0 and 3.1 media and reaches transfer rates of 300MB/s. An LCD screen and four-button panel let operators select copy or erase modes without a host computer.

Ideal for Volume Production

This unit suits organisations that need to duplicate large batches of flash drives in a single run, such as software distributors, training providers or IT departments deploying standard images. The asynchronous mode allows each slot to load, copy and unload independently so throughput stays high. Buyers who only need to copy a handful of drives at a time or who require interfaces beyond USB should consider a different device.

63-Target Asynchronous Operation

The single specification that determines fit is the sixty-three target ports combined with asynchronous copy mode. If a workflow demands simultaneous duplication to that many USB drives without a PC, this duplicator meets the requirement; if the maximum concurrent target count is lower, a smaller system will be more appropriate.

商品特色

  • Copy 63 USB drives simultaneously with 1 to 63 target slots
  • Achieve 18 GB per minute throughput at 300 MB per second transfer rate
  • Operate independently with standalone LCD control and no computer needed
  • Duplicate FAT16, FAT32, NTFS and Linux EXT2/3/4 formats via quick copy
  • Verify every bit with bit-by-bit compare for data integrity

商品規格

BrandSystor
ModelSYS-USB30-63
TypeUSB Flash Drive Duplicator
Target1 to 63
Buffer Memory256M
Supported MediaUSB 1.1, USB 2.0, USB 3.0, USB 3.1
Data Transfer Rate300MB/s
Language SupportEnglish or Japanese
DisplayLCD Screen
Operating TypeStandalone
Panel ColorBlack
Load TypeSlot
FeaturesQuick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats
Environmental SpecOperating Humidity: 15% ~ 90%
Power Supply115V / 230V

其他版本

同系列還有 5 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

What USB standard must my source and target drives support for the duplicator to work?

The duplicator accepts USB 1.1, USB 2.0, USB 3.0 and USB 3.1 flash drives, so any drive matching those standards will work.

Can I copy a USB 2.0 flash drive alongside USB 3.1 drives in the same session?

Yes, the unit supports mixed USB 1.1, 2.0, 3.0 and 3.1 media simultaneously across its 63 target slots.

How do I confirm each copy finished correctly on the LCD screen?

The LCD shows bit-by-bit compare results for every channel, letting you verify successful duplication at up to 300MB/s.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。